Index Terms -

- [1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20][21][22][23][24][25][26][27]
1
- 1.0.0.00135T202511211618L[1]
- 10.0.0.00042T202507241541L[1][2][3]
4
- 4B[1]
- 42[1][2][3]
8
- 8250 serial communications manager
  - devc-ser8250[1]
A
- aarch64le[1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20][21][22][23][24][25][26][27][28][29]
- adc-imx8 &[1]
- AHCI SATA interface ( devb-ahci-mx8x )[1]
- am62a[1][2]
- am62p[1][2]
- am62x[1][2]
- am752[1]
- AMD[1][2][3][4][5][6]
  - Xilinx[1][2][3]
    - [1][2][3]
      - kd240[1]
      - kr260[1]
      - kv260[1]
- amd_wdtkick[1]
- AMD Ryzen V2000 Sapphire IPC-FP6
  - BSP components[1]
B
- board
  - connecting[1][2][3][4][5][6][7][8][9][10][11]
- board-specific drivers
  - clock-xzynq[1][2][3][4]
  - devc-serxzynq[1]
  - devf-xzynq-qspi[1][2][3][4]
  - devs-genet.so[1]
  - devu-hcd-xzynq-xhci[1][2][3][4]
  - i2c-xzynq[1][2][3][4]
  - i2c-xzynq-axi[1]
  - libgpio-xzynq[1]
  - spi-xzynq-ultrascale[1][2][3][4]
- board-specific drivers devc-serxzynq[1][2][3]
- board-specific utility
  - adc-imx8[1]
  - gpio-amd-ryzen[1]
  - gpio-imx8mp[1][2]
  - gpio-imx8x[1]
- boot
  - x86_64[1][2]
- bootable USB device
  - x86_64[1][2][3][4]
- Broadcom[1][2]
  - Raspberry Pi[1]
    - 4B[1]
      - [1]
- BSP
  - building from the commandline[1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19]
  - building from the command line[1][2][3][4]
  - building in the IDE[1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20][21][22][23][24][25]
  - set DIP switches to boot from microSD card[1]
  - x86[1][2]
- BSP for TI Xilinx KD240
  - BSP installation notes[1][2][3][4][5][6][7][8][9]
- building
  - BSP from the commandline[1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19]
  - BSP from the command line[1][2][3][4]
  - BSP in the IDE[1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20][21][22][23][24][25]
C
- CAN[1][2]
- clock-xzynq[1][2][3][4]
- com.qnx.qnx800.bsp.hw.apalis_imx8qm[1]
- com.qnx.qnx800.bsp.hw.honeycomb_lx2[1]
- com.qnx.qnx800.bsp.hw.nxp_imx8mp_evk[1][2]
- com.qnx.qnx800.bsp.hw.nxp_imx8qm_mek[1]
- com.qnx.qnx800.bsp.hw.nxp_imx93_evk[1][2]
- com.qnx.qnx800.bsp.hw.phytec_imx93_phyboard_nash[1]
- com.qnx.qnx800.bsp.hw.ti_am62a_sk_evm[1][2]
- com.qnx.qnx800.bsp.hw.ti_am62p_sk_evm[1][2]
- com.qnx.qnx800.bsp.hw.ti_am62x_sk_evm[1][2]
- com.qnx.qnx800.bsp.hw.ti_j721e_am752x_evm[1]
- com.qnx.qnx800.bsp.hw.ti_j721e_tda4vm_sk[1]
- com.qnx.qnx800.bsp.hw.ti_j721s2_evm[1][2]
- com.qnx.qnx800.bsp.hw.ti_j722s_evm[1][2]
- com.qnx.qnx800.bsp.hw.ti_j742s2_evm[1][2]
- com.qnx.qnx800.bsp.hw.ti_j784s4_evm[1][2]
- com.qnx.qnx800.bsp.hw.toradex_imx8mp_verdin[1]
- com.qnx.qnx800.bsp.hw.variscite_imx8mp_dart[1]
- com.qnx.qnx800.bsp.hw.x86_64[1]
- com.qnx.qnx800.bsp.hw.xilinx_zynq_kd240[1]
- com.qnx.qnx800.bsp.hw.xilinx_zynq_kr260[1]
- com.qnx.qnx800.bsp.hw.xilinx_zynq_kv260[1]
- com.qnx.qnx800.target.screen.board.kria[1][2]
- com.qnx.qnx800.target.screen.board.rpi[1]
- com.qnx.qnx800.target.screen.board.zcu10x[1]
- commandline
  - building BSP from[1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19]
  - unzipping BSP[1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20][21]
- command line
  - building BSP from[1][2][3][4]
  - unzipping BSP[1][2][3][4]
- components
  - BSP for AMD Ryzen V2000 Sapphire IPC-FP6[1]
  - BSP for NXP i.MX8QM CPU board[1][2][3][4][5]
  - BSP for Xilinx KD240[1][2][3][4][5][6][7][8][9]
  - x86_64[1]
- connecting
  - board[1][2][3][4][5][6][7][8][9][10][11]
  - hardware[1][2][3]
  - hardware>[1][2][3][4][5][6][7][8]
  - to the Xilinx Zynq KD240 board[1]
  - to the Xilinx Zynq KR260 board[1]
  - to the Xilinx Zynq KV260 board[1]
  - to the Xilinx Zynq ZCU10x board[1]
- Cortex A53[1][2][3]
D
- Dart[1]
- date
  - setting or getting from realtime clock ( rtc )[1][2][3][4][5][6][7][8][9]
  - setting or getting from realtime clock ( rtc-imx9 )[1][2]
- devb-ahci-mx8x[1]
- devb-nvme[1]
- devb-sdmmc-xzynq[1]
- devcan-flexcan[1][2][3][4][5][6]
- devcan-xzynq[1][2]
- devc-ser8250[1]
- devc-serminiuart[1]
- devc-sermx1[1][2][3]
- devc-sermx8[1][2][3][4]
- devc-seromap[1][2][3][4][5][6][7][8][9]
- devc-serpl011[1]
- devc-serpl011-rpi5[1]
- devc-serxzynq[1][2][3][4]
- devf-j7-ospi[1][2][3][4][5][6][7][8]
- devf-nxp-fspi[1][2]
- devf-xzynq-qspi[1][2][3][4]
- device controller[1][2][3][4][5][6][7][8][9]
- devr-sa2ul[1][2][3][4][5]
- devs-cpsw-am62a.so[1]
- devs-cpsw-am62p.so[1]
- devs-cpsw-am62x.so[1]
- devs-cpsw-j721e.so[1][2]
- devs-cpsw-j721s2.so[1]
- devs-cpsw-j722s.so[1]
- devs-cpsw-j742s2.so[1]
- devs-cpsw-j784s4.so[1]
- devs-dwceqos.so[1][2][3][4]
- devs-ffec.so[1][2][3][4][5]
- devs-genet.so[1]
- devu-dcd-usbser-mx8-ci.so[1][2][3][4][5][6][7]
- devu-dcd-usbumass-mx8-ci.so[1][2]
- devu-hcd-bcm2711-xhci.so[1][2]
- devu-hcd-cdns3-xhci[1][2][3][4][5][6]
- devu-hcd-cdns3-xhci.so[1][2][3][4][5][6]
- devu-hcd-dwc3-xhci.so[1][2][3][4][5][6]
- devu-hcd-ehci-mx28.so[1][2][3][4][5][6][7][8]
- devu-hcd-imx8-xhci.so[1][2][3][4][5][6][7][8][9][10]
- devu-hcd-xzynq-xhci.so[1][2][3][4][5][6][7][8]
- driver commands
  - NXP i.MX8QM CPU board[1][2]
  - NXP i.MX8QM Plus CPU board[1]
  - Xilinx KD240[1][2][3][4][5][6][7][8][9][10]
  - Xilinx KR260[1]
  - Xilinx KV260[1]
  - Xilinx Ultrascale+ ZCU10X[1]
- drivers
  - AHCI SATA interface ( devb-ahci-mx8x )[1]
  - devc-seromap[1][2][3][4][5][6][7][8][9]
  - devr-sa2ul[1][2][3][4][5]
  - devu-hcd-cdns3-xhci[1][2][3][4][5][6]
  - eMMC[1]
  - i2c-tda4[1][2][3][4][5][6][7][8][9]
  - MMC[1]
  - Non-Volatile Memory Express ( devb-nvme )[1]
  - NVMe[1]
  - SD[1]
E
- EHCI[1][2][3][4]
- enhanced host controller (ARC) interface[1][2][3][4]
- Enhanced Host Controller (ARC) Interface (EHCI) USB controllers XHCI[1][2][3][4]
- extensible host controller interface[1][2][3][4][5][6][7][8][9]
- Extensible Host Controller Interface XHCI[1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20][21][22][23][24][25][26][27][28]
F
- fan-rpi5[1]
- FAT32 partition
  - creating (Windows 7)[1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20][21]
- flash memory, driver ( devb-sdmmc-xzynq )[1]
- FlexCAN[1][2][3][4][5][6]
G
- generic[1]
- Generic x86_64[1][2]
- gpio-amd-ryzen &[1]
- gpio-bcm2711[1]
- gpio-imx8mp &[1][2]
- gpio-imx8x &[1]
- gpio-rp1[1]
H
- hardware
  - connecting[1][2][3][4][5][6][7][8][9]
  - connection[1][2][3][4][5][6][7][8][9][10][11]
- Honeycomb[1]
- honeycomb_thermal[1]
- host OS
  - BSP for Xilinx KD240[1][2][3][4]
I
- i2c-bcm2711[1]
- i2c-dwc-rpi5[1]
- i2c-imx[1][2][3][4]
- i2c-lpi2cqm[1][2][3][4]
- i2c-tda4[1][2][3][4][5][6][7][8][9]
- i2c-xzynq[1][2][3][4]
- i2c-xzynq-axi[1]
- IDE
  - importing BSP[1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20][21][22][23][24][25]
- IFS
  - pre-built image[1][2][3][4][5][6][7][8][9][10][11][12][13][14]
- image
  - prebuilt[1][2]
  - pre-built IFS[1][2][3][4][5][6][7][8][9][10][11][12][13][14]
- importing
  - BSP into QNX Momentics IDE[1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20][21][22][23][24][25]
- imx8[1][2][3]
- imx8+[1]
- imx8mp[1][2][3][4]
- imx8qm[1]
- imx93[1][2]
- installation notes
  - BSP for TI Xilinx KD240[1][2][3][4][5][6][7][8][9]
- Intel[1]
  - x86_64[1]
    - generic[1]
      - [1]
- io-usb-otg
  - command for launching driver for xHCI USB controllers[1][2][3][4][5][6]
J
- j721e[1][2]
- j721s2[1][2]
- j722s[1][2]
- j742s2[1][2]
- j784s4[1][2]
- Jacinto[1]
- Jacinto 7[1]
K
- kd240[1]
- KR260[1][2][3]
- KRIA[1][2]
  - KR260[1][2]
  - KV260[1][2]
- KV260[1][2][3]
L
- libgpio-xzynq[1]
- LX2[1]
M
- mbox-bcm[1]
- mbox-bcm2711[1]
- microSD
  - bootable FAT32 partition[1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20][21]
  - format[1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20][21]
  - partition[1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20][21]
  - preparing on Windows[1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20][21]
N
- Nash[1]
- Non-Volatile Memory Express
  - interface, driver ( devb-nvme )[1]
- NXP[1][2][3][4][5][6]
  - [1][2]
    - imx8[1][2]
      - imx8mp[1]
      - imx8qm[1]
  - AMD[1]
    - Xilinx[1]
      - imx93[1]
  - i.mx93[1]
    - [1]
  - imx93
    - imx93
      - imx93[1]
  - Toradex[1][2]
    - [1]
      - [1]
    - imx8[1]
      - imx8mp[1]
- NXP i.MX8QM CPU board
  - BSP components[1][2][3][4][5]
P
- partitioning
  - microSD[1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20][21]
- Phyboard[1]
- PhyTec[1]
  - Phyboard[1]
    - Nash[1]
- Pi[1]
- prebuilt
  - image[1][2]
- pre-built
  - IFS image[1][2][3][4][5][6][7][8][9][10][11][12][13][14]
R
- Raspberry[1]
- Raspberry Pi[1]
- Raspberry Pi 5[1]
- realtime clock
  - setting or getting date from ( rtc )[1][2][3][4][5][6][7][8][9]
  - setting or getting date from ( rtc-imx9 )[1][2]
- rpi5[1]
- rtc[1][2][3][4][5][6][7]
- rtc-imx8x[1][2]
- rtc-imx9[1][2]
S
- SATA interface
  - AHCI ( devb-ahci-mx8x )[1]
- sc-imx8[1][2]
- screen[1][2][3][4]
- screen support[1][2][3][4]
- sdmmc device controller[1][2][3][4][5]
- serial communications manager
  - 8250 ( devc-ser8250 )[1]
- set switches[1]
- smbus-pch[1]
- software
  - required[1][2][3][4]
- SolidRun[1]
  - [1]
    - [1]
- spi-amd[1]
- spi-bcm2711[1]
- spi-dwc[1]
- spi-ecspi[1][2][3]
- spi-imx8lpspi[1][2][3][4]
- spi-xzynq-ultrascale[1][2][3][4]
- System Controller[1][2]
T
- target OS
  - BSP for Xilinx KD240[1][2][3][4]
- tda4vm[1]
- technical support[1]
- TI[1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16]
  - [1][2][3][4][5][6][7][8][9][10]
    - j721e[1]
      - tda4vm[1]
    - j721s2[1][2]
      - [1][2]
    - j722s[1][2]
      - [1][2]
    - j742s2[1][2]
      - [1][2]
    - j784s4[1]
      - [1]
  - am62a[1]
    - am62a[1]
  - am62p
    - am62p[1][2]
  - am62x[1]
    - am62x[1]
  - j721e[1]
    - am752[1]
  - Jacinto[1]
    - j784s4[1]
      - screen[1]
- time of day
  - setting or getting from realtime clock ( rtc )[1][2][3][4][5][6][7][8][9]
  - setting or getting from realtime clock ( rtc-imx9 )[1][2]
- Toradex[1][2][3][4]
  - Verdin[1]
    - imx8mp[1]
- transfer QNX IFS image
  - USB device[1][2]
- typographical conventions[1]
U
- unzipping
  - BSP from commandline[1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20][21]
  - BSP from command line[1][2][3][4]
- USB
  - managers
    - XHCI controllers ( devu-hcd-bcm2711-xhci.so )[1]
    - XHCI controllers ( devu-hcd-cdns3-xhci.so )[1][2][3][4][5][6]
    - xHCI controllers ( devu-hcd-dwc3-xhci.so )[1][2][3][4][5][6]
    - XHCI controllers ( devu-hcd-ehci-mx28.so )[1][2][3][4]
    - XHCI controllers ( devu-hcd-imx8-xhci.so )[1][2][3][4][5]
    - xHCI controllers ( devu-hcd-xhci )[1][2][3][4][5][6]
    - XHCI controllers ( devu-hcd-xzynq-xhci )[1][2][3][4]
- USB device
  - transfer QNX IFS image[1][2]
- USB mass storage device controller[1][2]
- USB serial device controller[1][2]
V
- Variscite[1]
  - Dart[1]
    - imx8mp[1]
- Verdin[1]
W
- watchdog[1][2][3][4][5][6][7]
- watchdog timer[1][2][3][4][5][6][7]
- wdtkick[1][2][3][4]
- wdtkick-j7[1][2]
- Windows
  - preparing microSD[1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20][21]
X
- x86
  - boot[1][2]
  - bootable USB device[1][2]
- x86_64[1][2]
  - bootable disk image[1][2]
  - BSP[1][2]
  - BSP components[1]
- XHCI[1][2][3][4][5][6][7][8][9][10]
- XHCI, USB support for ( devu-hcd-bcm2711-xhci.so )[1]
- XHCI, USB support for ( devu-hcd-cdns3-xhci.so )[1][2][3][4][5][6]
- xHCI, USB support for ( devu-hcd-dwc3-xhci.so )[1][2][3][4][5][6][7][8][9][10][11][12]
- XHCI, USB support for ( devu-hcd-ehci-mx28.so )[1][2][3][4]
- XHCI, USB support for ( devu-hcd-imx8-xhci.so )[1][2][3][4][5]
- XHCI, USB support for ( devu-hcd-xzynq-xhci )[1][2][3][4]
- Xilinx[1][2][3][4][5][6][7][8]
  - Zynq[1][2][3]
    - KRIA[1][2]
      - KR260[1][2]
      - KV260[1][2]
    - ZCU[1]
- Xilinx KD240
  - BSP components[1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18]
  - connecting the hardware[1][2][3][4][5][6][7][8][9]
  - driver commands[1][2][3][4][5][6][7][8][9][10][11][12][13]
- Xilinx KR260
  - driver commands[1]
- Xilinx KV260
  - driver commands[1]
- Xilinx Software Development Kit
  - download[1][2][3][4]
- Xilinx Ultrascale ZCU10X
  - driver commands[1]
- Xilinx ZCU10
  - Zynq[1]
- Xilinx Zynq UltraScale+ MPSoC KD240 Evaluation Kit
  - BSP components[1][2][3][4][5][6][7][8][9]
Z
- ZCU10[1]
- ZCU10x[1]
- ZCU102[1]
- ZCU106[1]
- Zynq[1]
- Zynz[1][2]