QNX SDP 8.0 BSP for Xilinx Zynq UltraScale+ MPSoC KV260: Release Notes


Date of this edition: November 15, 2024

QNX SDP is a cross-compiling and debugging environment, including an IDE and command-line tools, for building binary images and programs for ARM v8 and x86_64 targets running the QNX OS 8.0.

Board Support Packages (BSP) are available for various hardware platforms on QNX SDP 8.0. This is a BSP release note for: Xilinx Zynq UltraScale+ MPSoC KV260

Throughout this document, you may see reference numbers associated with particular issues or changes. When corresponding with our Technical Support staff about an issue, use the relevant reference number. You might also find the reference numbers useful for tracking fixed issues.

Note:

A QNX BSP may be made available as an Experimental, Validated, or General Availability (GA) release depending on factors such as software maturity and terms of commercial availability.

You can check the BSP download location for the currently offered BSP release.

Version details

This update includes the following packages

Name Package ID Build Link version
QNX SDP 8.0 BSP for Xilinx Zynq UltraScale+ MPSoC KV260 com.qnx.qnx800.bsp.hw.xilinx_zynq_kv260 0.0.1.00001T202410010419L
This release supports the following drivers:
  • Startup
  • Serial
  • Network
  • SPI
  • I2C
  • USB OTG host controller driver
  • Quad SPI NOR Flash
  • SD/MMC driver
Note:

The above peripherals are in the device's PS domain.

This BSP release supports boards specified in the Supported hardware section.

Supported hardware

This BSP supports the Xilinx xzynq KRIA board KV260. The following revisions were used for development and testing of this BSP:

  • X-MLCC-05058

Known issues

Reference Issue Workaround
2968646 USB 3.0 devices are not getting detected after slaying and restarting of "io-usb-otg" & "devb-umass" drivers. Not available

Licensing information

The QNX SDP licensing, packaging, and fulfillment model from the previous release has been carried forward to this release. That is, QNX SDP will be available in the QNX Download Center and QNX Software Center as a new product baseline. Additionally, the license agreements will include a few enhancements for clarifications but otherwise will remain unchanged.

Getting started with this BSP

We recommend that you read the Building Embedded Systems guide, which contains common information about working with all BSPs. This guide is available on the QNX Software Development Platform 8.0 documentation website.

Note:

To ensure that you pick up the same components from your development environment, we recommend that you rebuild the IFS image on your host system.

This BSP includes prebuilt IFS images to quickly get you up-and-running; however, these images might not have the same components as your development environment.

Technical support

To obtain technical support for any QNX product, visit the Support area on our website: https://blackberry.qnx.com/en/support. You'll find a range of support options.

For product experience and roadmap information, please contact QNX Product Management.

Page updated: