About This BSP
This chapter lists what's included in the BSP, the supported host system operating systems, and other relevant information to use this BSP.
What's in this BSP?
This BSP contains the following components.
For the status of a driver, see the release notes for this BSP.
Component | Format | Comments |
---|---|---|
I2C driver | Source and binary | |
CAN driver | Source and binary | |
Network driver | Binary only | |
QNX IPL | Source and binary | |
Real-time clock (RTC) | Source and binary | |
SD/MMC driver | Source and binary | |
Serial driver | Source and binary | |
SPI driver | Source and binary | |
Startup | Source and binary | |
USB Host Controller driver | Binary only | |
Watchdog | Binary only |
Supported OSs
To install and use
this BSP, you must have installed the QNX SDP 8.0
on a Linux or Windows host. This BSP supports the following target OS:
- QNX OS 8.0
Supported boards
In the QNX Software Center, see the release notes for this BSP for
the list of supported boards using these steps:
- On the Available or Installed tab, navigate to QNX Board Support > BSP & Drivers, right-click the name of your BSP, and then select Properties.
- In the Properties window, on the General Information pane, click the link beside Release Notes.
Known issues
For the list of known issues, see the release notes for this BSP.
Page updated: