About This BSP
This chapter lists what's included in the BSP, the supported host system operating systems, and other relevant information to use this BSP.
What's in this BSP
This BSP contains the following components:
Component | Format | Comments |
---|---|---|
Startup | Source and binary | |
Serial driver | Source and binary | |
SDMMC driver | Source and binary | |
Network driver | Binary only | |
QSPI NOR Flash | Source and binary | |
USB driver | Binary only | |
SPI driver | Source and binary | |
I2C driver | Source and binary | |
Clock manager | Source and binary |
Supported OSs
To install and use
this BSP, you must have installed the QNX SDP 8.0
on a Linux or Windows host. This BSP supports the following target OS:
- QNX OS 8.0
Supported boards
In the QNX Software Center, see the release notes for this BSP for
the list of supported boards using these steps:
- On the Available or Installed tab, navigate to Board Support Packages BSP, right-click Name_of_your_BSP, and then select Properties.
- In the Properties window, on the General Information pane, click the link beside Release Notes.
Known issues
For the list of known issues, see the release notes for this BSP.
Page updated: