QNX SDP 8.0 BSP for NXP i.MX 8M Plus: Release Notes
Date of this edition: November 27, 2024
QNX SDP is a cross-compiling and debugging environment, including an IDE and command-line tools, for building binary images and programs for ARM v8 and x86_64 targets running the QNX OS 8.0.
Board Support Packages (BSP) are available for various hardware platforms on QNX SDP 8.0. This is a BSP release note for: NXP i.MX 8M Plus
Throughout this document, you may see reference numbers associated with particular issues or changes. When corresponding with our Technical Support staff about an issue, use the relevant reference number. You might also find the reference numbers useful for tracking fixed issues.
A QNX BSP may be made available as an Experimental, Validated, or General Availability (GA) release depending on factors such as software maturity and terms of commercial availability.
You can check the BSP download location for the currently offered BSP release.
Version details
This update includes the following packages
Name | Package ID | Build Link version |
---|---|---|
QNX SDP 8.0 BSP for NXP i.MX 8M Plus | com.qnx.qnx800.bsp.hw.nxp_imx8mp_evk | 0.0.2.00094T202401181553L |
This BSP release supports boards specified in the Supported hardware section.
Supported hardware
This BSP supports the NXP i.MX 8M Plus EVK (8MPLUSLPD4-EVK). The following revisions were used for development and testing of this BSP:
- SCH-46370 REV B1
Revision history
BuildID 56 (0.0.1.00056T202311201142L)- Startup
- Inter-integrated circuit (I2C)
- Messaging Unit library
- Network
- Octal xSPI NOR Flash
- QNX initial program loader (IPL)
- Real-time clock
- CAN driver
- SD/MMC driver
- Serial
- SPI
- PCI HW module driver
- TCPM USB utility
- USB OTG host controller driver
- Watchdog
- For graphics driver support, this release has been built and tested with the Screen Board Support i.MX8MP package, version 8.0 BuildID 106.
The following drivers have not been tested in SDP 8.0:
- SDMA
- Messaging Unit library
Fixed issues
Reference | Issue | Fixed in version |
---|---|---|
2950940 | Unable to list files on flash drives issue. | Build 94(0.0.2.00094T202401181553L) |
Known issues
Reference | Issue | Workaround |
---|---|---|
2970667 | com.qnx.qnx800.host.linux.x86_64.binutils version 2.42 and later does not support labels with leading zeros. This causes a compiler failure in $BSP_ROOT_DIR/src/hardware/startup/boards/imx8mp/_start.S. | Apply the following patch from $BSP_ROOT_DIR:
|
Licensing information
The QNX SDP licensing, packaging, and fulfillment model from the previous release has been carried forward to this release. That is, QNX SDP will be available in the QNX Download Center and QNX Software Center as a new product baseline. Additionally, the license agreements will include a few enhancements for clarifications but otherwise will remain unchanged.
Getting started with this BSP
We recommend that you read the Building Embedded Systems guide, which contains common information about working with all BSPs. This guide is available on the QNX Software Development Platform 8.0 documentation website.
To ensure that you pick up the same components from your development environment, we recommend that you rebuild the IFS image on your host system.
This BSP includes prebuilt IFS images to quickly get you up-and-running; however, these images might not have the same components as your development environment.
Technical support
To obtain technical support for any QNX product, visit the Support area on our website: https://blackberry.qnx.com/en/support. You'll find a range of support options.
For product experience and roadmap information, please contact QNX Product Management.