Home
QNX SDP 8.0 BSP Documentation
The board support package (BSP) documentation includes user guides that describe how to work with the BSPs provided for the QNX Software Development Platform (SDP) 8.0, and release notes that describe the supported features and hardware as well as any known issues for each BSP.
NXP
Variscite i.MX8MP DART
User's Guide
About This BSP
These notes list what's included in the BSP, and identify the host OSs and boards it supports.

QNX SDP 8.0 BSP Documentation
The board support package (BSP) documentation includes user guides that describe how to work with the BSPs provided for the QNX Software Development Platform (SDP) 8.0, and release notes that describe the supported features and hardware as well as any known issues for each BSP.
- AMD
- Broadcom
- Intel
- NXP
  - i.MX 8M Plus
  - i.MX 8 QuadMax MEK
  - i.MX93 EVK
  - Phytec phyBOARD-NASH-i.MX93
  - SolidRun Honeycomb LX2
  - Toradex Apalis i.MX8QM Ixora
  - Toradex Verdin i.MX8MP
  - Variscite i.MX8MP DART
    - Release Notes
    - User's Guide
      - Before You Begin
        Before you begin working with this BSP, you should become familiar with the resources available to you.
      - About This BSP
        These notes list what's included in the BSP, and identify the host OSs and boards it supports.
      - Installation Notes
        These installation notes describe how to build, work with, and run this BSP.
      - Driver Commands
        The tables below provide a summary of driver commands for the Xilinx KD240.
      - BSP-specific Drivers and Utilities
- Texas Instruments
Typographical Conventions, Support, and Licensing
This section describes the typographical conventions used throughout the documentation, explains how to obtain technical support, and provides some information about licensing.

About This BSP

These notes list what's included in the BSP, and identify the host OSs and boards it supports.

What's in this BSP

This BSP contains the following components: For the status of a driver, see the release notes for this BSP.


Component	Format	Comments
Startup	Source and binary
Serial driver	Source and binary
I2C driver	Source and binary	4 I2C interfaces
CAN driver	Source and binary
DMA library	Source and binary
Messaging Unit library	Source and binary
Network driver	Binary only
PCI driver	Binary only
Real-time clock (RTC)	Source and binary
SD/MMC driver	Source and binary
SPI driver	Source and binary
USB Host Controller driver	Binary only	USB controller driver (host mode)
General Purpose Inputs & Outputs (GPIO) driver	Source and binary
General Purpose Inputs & Outputs (GPIO) utility	Source and binary
Watchdog	Binary only

Supported OSs

To install and use this BSP, you must have installed the QNX SDP 8.0 on a Linux or Windows host. This BSP supports the following target OS:

QNX OS 8.0

Supported boards

This guide supports the Variscite i.MX8MP Dart board.

Known issues

For the list of known issues, see the release notes for this BSP. The release notes for this BSP are available as a separate file that's downloaded with this guide.

Page updated: September 26, 2025