About This BSP
These notes list what's included in the BSP, and identify the host OSs and boards it supports.
What's in this BSP
This BSP contains the
following components:
For the status of a driver, see the release notes for this BSP.
| Component | Format | Comments |
|---|---|---|
| Startup | Source and binary | |
| Serial driver | Source and binary | 2 serial interfaces |
| I2C driver | Source and binary | 2 I2C interfaces |
| CAN driver | Source and binary | |
| Network driver | Binary only | |
| Real-time clock (RTC) | Source and binary | |
| SD/MMC driver | Source and binary | |
| DMA library | Source and binary | |
| Messaging Unit library | Source and binary | |
| SPI driver | Source and binary | |
| USB Host Controller driver | Binary only | |
| Watchdog | Binary only |
Supported OSs
To install and use
this BSP, you must have installed the QNX SDP 8.0
on a Linux or Windows host. This BSP supports the following target OS:
- QNX OS 8.0
Supported boards
This guide supports the Phytec phyBOARD-Nash board.
Known issues
For the list of known issues, see the release notes for this BSP. The release notes for this BSP are available as a separate file that's downloaded with this guide.
Page updated: