i2c-tda4
Driver for inter-integrated circuits on the Texas Instruments Jacinto 7 J784S4 Evaluation Module.
Syntax:
i2c-tda4 [board_specific_option [board_specific_option]...]
[generic_option [generic_option]...]Runs on:
QNX OS
Targets:
aarch64le
Options:
- -a address
- Own address. The default is 1.
- -c clock
- Peripheral clock. The default is 96 MHz.
- -d address
- Don't pre-fill transmit FIFO, fill FIFO after transfer is started.
- -i irq
- The I2C interrupt event number. The default is 232.
- -f
- Don't treat Receiver Overruns (ROVR) and Transmit Underflows (XUDF) as errors.
- -h value
- Adjust the high-clock period, in nanoseconds (ns). The default is 0.
- -l value
- Adjust the low-clock period, in nanoseconds (ns). The default is 0.
- -p address
- The I2C base address. The default is 0x02000000.
Page updated: