About This BSP
These notes list what's included in the BSP, and identify the host OSs and boards it supports.
What's in this BSP
This BSP contains the
following components:
For the status of a driver, see the release notes for this BSP.
| Component | Format | Comments |
|---|---|---|
| Startup | Source and binary | |
| Serial driver | Source and binary | |
| I2C driver | Source and binary | 4 I2C interfaces |
| DMA library | Source and binary | |
| Messaging Unit library | Source and binary | |
| Network driver | Source and binary | |
| PCI driver | Binary only | |
| Real-time clock (RTC) | Source and binary | |
| SD/MMC driver | Source and binary | |
| SPI driver | Source and binary | |
| USB Host Controller driver | Binary only | USB controller driver (host mode) |
| General Purpose Inputs & Outputs (GPIO) driver | Source and binary | |
| General Purpose Inputs & Outputs (GPIO) utility | Source and binary | |
| Watchdog | Source and binary |
Supported OSs
To install and use
this BSP, you must have installed the QNX SDP 8.0
on a Linux or Windows host. This BSP supports the following target OS:
- QNX OS 7.1
Supported boards
This guide supports the Toradex Verdin i.MX 8M Plus SoM installed on the Toradex Dahlia carrier board.
Known issues
For the list of known issues, see the release notes for this BSP. The release notes for this BSP are available as a separate file that's downloaded with this guide.
Page updated: