About This BSP
These notes list what's included in the BSP, and identify the host OSs and boards it supports.
What's in this BSP
This BSP contains the
following components:
For the status of a driver, see the release notes for this BSP.
Component | Format | Comments |
---|---|---|
Analog Inputs | Source and binary | 4 ADC inputs |
CAN driver | Source and binary | 2 CAN interfaces |
DMA library | Source and binary | |
General Purpose Inputs & Outputs (GPIO) driver | Source and binary | |
General Purpose Inputs & Outputs (GPIO) utility | Source and binary | |
I2C driver | Source and binary | 3 I2C interfaces |
IPL | Source and binary | |
Messaging Unit library | Source and binary | |
Network driver | Source and binary | |
PCI driver | Binary only | |
Real-time clock (RTC) | Source and binary | |
SD/MMC driver | Source and binary | |
Serial driver | Source and binary | 4 serial interfaces |
SPI driver | Source and binary | 2 SPI interfaces |
Startup | Source and binary | |
System Controller (SC) | Source and binary | |
USB Host Controller driver | Binary only | |
Watchdog | Source and binary |
Supported OSs
To install and use
this BSP, you must have installed the QNX SDP 8.0
on a Linux Windows host. This BSP supports the following target OS:
- QNX OS 8.0
Supported boards
This guide supports the Toradex Apalis i.MX 8 QuadMax SoM installed on the Toradex Ixora carrier board.
Known issues
For the list of known issues, see the release notes for this BSP. The release notes for this BSP are available as a separate file that's downloaded with this guide.
Page updated: