About This BSP
This chapter lists what's included in the BSP, the supported host system operating systems, and other relevant information to use this BSP.
What's in this BSP?
This BSP contains the following
components. For the status of a driver, see the release notes for this BSP.
Component | Format | Comments |
---|---|---|
Graphics driver | Provided as a separate package | Screen Graphics Subsystem |
I2C driver | Source and binary | |
Messaging Unit library | Source and binary | |
Network driver | Binary only | |
Octal xSPI NOR flash memory driver | Source and binary | |
PCI driver | Binary only | |
QNX IPL | Source and binary | |
Real-time clock (RTC) | Source and binary | |
SD/MMC driver | Source and binary | |
Serial driver | Source and binary | |
SPI driver | Source and binary | |
Startup | Source and binary | |
USB Host Controller driver | Binary only | |
Watchdog | Binary only |
Supported OSs
To install and use this BSP, you must have installed the QNX SDP 8.0 on a Linux or Windows host. This BSP
supports the following target OS:
- QNX OS 8.0
Supported boards
In the QNX Software Center, see the release notes for this BSP for
the list of supported boards using these steps:
- On the Available or Installed tab, navigate to Board Support Packages BSP, right-click Name_of_your_BSP, and then select Properties.
- In the Properties window, on the General Information pane, click the link beside Release Notes.
Known issues
For the list of known issues, see the release notes for this BSP.
Interrupt table for this board
The interrupt vector table can be found in the buildfile located at images/imx8mp-evk.build in your BSP. This interrupt table is a useful reference when you want to write custom resource managers and customize the BSP.
Page updated: