spi-xzynq-ultrascale
SPI driver on the Xilinx KD240.
Syntax:
spi-xzynq-ultrascale [-c config_file] [-v]
Runs on:
QNX OS
Options:
- -c config_file
- Path to the SPI configuration file (default: /etc/system/config/spi/spi.conf)
- -v
- Increase verbosity. This will override the "verbose" value in the config file
Note:
SPI driver has been disabled in the buildfile. To enable it, use SPI-enabled custom PL image and
uncomment the SPI driver command in the buildfile, rebuild the image, and load the image onto the board.
Examples:
Start SPI driver:
spi-xzynq-ultrascale -c /etc/custom/spi.conf
Page updated: