About this BSP
This chapter lists what's included in the BSP, the supported host system operating systems, and other relevant information to use this BSP.
What's in this BSP
This BSP contains the following components:
| Component | Format | Comments |
|---|---|---|
| Graphics driver | Provided as a separate package | Screen Graphics Subsystem |
| I2C driver | Source and binary | |
| MMC/SD driver | Source and binary | |
| Network driver | Binary only | |
| OSPI Flash | Source and binary | |
| PCIe | Binary only | |
| Real-time clock (RTC) | Source and binary | |
| Serial driver | Source and binary | |
| SMMU Manager | Binary only | Makes use of the DMA containment and memory management support available for the ARM architecture. The libraries and header files are part of QNX SDP 8.0 |
| Startup | Source and binary | |
| TRNG | Source and binary | True Random Number Generator (TRNG) using SA2_UL Engine |
| Watchdog timer | Binary only | |
| USB Host Controller | Binary only | USB (host mode) driver is provided in binary format as part of this BSP. |
Supported OSs
To install and use
this BSP, you must have installed the QNX SDP 8.0
on a Linux or Windows host. This BSP supports the following target OS:
- QNX OS 8.0
Supported boards
In the QNX Software Center, see the release notes for this BSP for
the list of supported boards using these steps:
- On the Available or Installed tab, navigate to Board Support Packages BSP, right-click Name_of_your_BSP, and then select Properties.
- In the Properties window, on the General Information pane, click the link beside Release Notes.
Known issues
For the list of known issues, see the release notes for this BSP.
Page updated: