About This Guide
This guide contains installation and start-up instructions for the QNX Board Support Package (BSP) for x86_64 platforms; x86 (32-bit) isn't supported in this release.
At times, there's specific information for variants of the x86_64 platforms based on a particular processor family or SoC. You should refer to information in those chapters if your board uses that processor family or SoC.
This documentation includes:
- an overview of QNX BSP
- links to documentation about how to build QNX embedded systems, which you should read before you begin working with this BSP
- what's new in the BSPs for this release
- the structure and contents of the BSP
- how to prepare a bootable USB device (e.g., USB memory stick)
- how to install the BSP and boot it on a board
- how to build your BSP
To find out about: | See: |
---|---|
The resources available to you, and what you should know before starting to work with this BSP | Before You Begin |
What's included in the BSP, supported host operating systems, and boards | About This BSP |
Installing this BSP | Installation Notes |
Building this BSP | Build the BSP |
Driver commands | Generic x86_64_Driver Commands |
Working with Intel Elkhart Lake CRB platform | Working with Intel Elkhart Lake CRB platform |
Working with Nexcobot Elkhart Lake SCB100 platform | Working with Nexcobot Elkhart Lake SCB100 platform |
Working with SECO Amston Lake SOM-SMARC-ASL platform | Working with SECO Amston Lake platform |
Page updated: