Home
QNX SDP 8.0 BSP Documentation
The board support package (BSP) documentation includes user guides that describe how to work with the BSPs provided for the QNX Software Development Platform (SDP) 8.0, and release notes that describe the supported features and hardware as well as any known issues for each BSP.
Texas Instruments
TI AM62x Starter Kit Evaluation Module (SK EVM)
User's Guide
Installation Notes
These installation notes describe how to use this BSP to boot your board with the QNX OS.
Booting from OSPI

QNX SDP 8.0 BSP Documentation
The board support package (BSP) documentation includes user guides that describe how to work with the BSPs provided for the QNX Software Development Platform (SDP) 8.0, and release notes that describe the supported features and hardware as well as any known issues for each BSP.
- AMD
- Broadcom
- Intel
- NXP
- Texas Instruments
  - Jacinto 7 J721E (DRA829/TDA4xM) Evaluation Module
  - Jacinto 7 TDA4VM Starter Kit
  - Jacinto 7 J721S2 Evaluation Module
  - J722S Evaluation Module
  - Jacinto 7 J742S2 Evaluation Module
  - Jacinto 7 J784S4 Evaluation Module
  - TI AM62a Starter Kit Evaluation Module (SK EVM)
  - TI AM62P Starter Kit Evaluation Module (SK EVM)
  - TI AM62x Starter Kit Evaluation Module (SK EVM)
    - Release Notes
    - Graphics Release Notes
      This document lists the details, updates, and issues associated with this screen board support release.
    - User's Guide
      - Before you begin
        Before you begin working with this BSP you should become familiar with the resources available to you when building QNX embedded systems.
      - About this BSP
        This chapter lists what's included in the BSP, the supported host system operating systems, and other relevant information to use this BSP.
      - Installation Notes
        These installation notes describe how to use this BSP to boot your board with the QNX OS.
        Download and set up the BSP
        You can download Board Support Packages (BSPs) using the QNX Software Center.
        Connect the hardware
        Attach the USB and other cables to the appropriate hardware connectors.
        Prepare a bootable microSD
        You can prepare a bootable microSD on a Linux or Windows host system. We recommend that you use Class 10 (or UHS-1) microSDs.
        Preparing the microSD to boot the board
        You can prepare your microSD to boot using U-Boot.
        Boot using U-Boot
        Booting from OSPI
      - Build the BSP
        You can use the QNX Momentics IDE or the commandline on Linux or Windows to build an image.
      - Configure the Screen Graphics Subsystem
        The default buildfile (kd240.build) that's provided with this BSP doesn't build an image that starts the Screen Graphics Subsystem (Screen). Instead, you must use the image that's built from the am62x-evm-graphics.build file, which starts Screen automatically.
      - Driver Commands
        The tables below provide a summary of driver commands.
      - BSP-specific Drivers and Utilities
Typographical Conventions, Support, and Licensing
This section describes the typographical conventions used throughout the documentation, explains how to obtain technical support, and provides some information about licensing.

Booting from OSPI

The preferred boot method for decreased boot times is to boot using the secondary boot loader (SBL) for OSPI. For instructions on booting from OSPI read section 3.1.1.5.2. Booting from SPI of the Processor SDK Linux Software Developer’s Guide for AM62x that's available on the Texas Instruments website at https://software-dl.ti.com/processor-sdk-linux/esd/AM62X/10_00_07_04/exports /docs/linux/Foundational_Components/U-Boot/UG-SPI.html#booting-from-spi

Page updated: October 24, 2025