Home
QNX SDP 8.0 BSP Documentation
The board support package (BSP) documentation includes user guides that describe how to work with the BSPs provided for the QNX Software Development Platform (SDP) 8.0, and release notes that describe the supported features and hardware as well as any known issues for each BSP.
NXP
Variscite i.MX8MP DART
User's Guide
Installation Notes
These installation notes describe how to build, work with, and run this BSP.
Set up the hardware
System Layout
The following is the memory layout required for the Xilinx KD240

QNX SDP 8.0 BSP Documentation
The board support package (BSP) documentation includes user guides that describe how to work with the BSPs provided for the QNX Software Development Platform (SDP) 8.0, and release notes that describe the supported features and hardware as well as any known issues for each BSP.
- AMD
- Broadcom
- Intel
- NXP
  - i.MX 8M Plus
  - i.MX 8 QuadMax MEK
  - i.MX93 EVK
  - Phytec phyBOARD-NASH-i.MX93
  - SolidRun Honeycomb LX2
  - Toradex Apalis i.MX8QM Ixora
  - Toradex Verdin i.MX8MP
  - Variscite i.MX8MP DART
    - Release Notes
    - User's Guide
      - Before You Begin
        Before you begin working with this BSP, you should become familiar with the resources available to you.
      - About This BSP
        These notes list what's included in the BSP, and identify the host OSs and boards it supports.
      - Installation Notes
        These installation notes describe how to build, work with, and run this BSP.
        Download and set up the BSP
        You can download Board Support Packages (BSPs) using the QNX Software Center.
        Set up the hardware
        System Layout
        The following is the memory layout required for the Xilinx KD240
        Build the BSP
        You can use the QNX Momentics IDE or the command line on Linux or Windows to build an image.
        Retrieve the DTB file
        Prepare a bootable microSD
        You prepare a bootable microSD on a Linux, or Windows host system. We recommend that you use Class 10 (or UHS-1) microSDs.
        Prepare microSD to install QNX IFS
        You can manually install QNX OS on the board. A FAT32-formatted microSD is required. Using the microSD is the easiest way to transfer images from your host computer to the eMMC on the board.
        Install QNX IFS
        To manually install QNX OS, you need to copy the QNX IFS image from the microSD to the internal storage on the board (e.g.: eMMC).
      - Driver Commands
        The tables below provide a summary of driver commands for the Xilinx KD240.
      - BSP-specific Drivers and Utilities
- Texas Instruments
Typographical Conventions, Support, and Licensing
This section describes the typographical conventions used throughout the documentation, explains how to obtain technical support, and provides some information about licensing.

System Layout

The following is the memory layout required for the Variscite i.MX8MP DART

The table below shows the memory layout for the BSP image:


Item	Start	End
OS image location	`0x40800000`

Page updated: September 26, 2025