Jump to main content
Index
Advanced search
  1. Home
  2. QNX SDP 8.0 BSP Documentation

    The board support package (BSP) documentation includes user guides that describe how to work with the BSPs provided for the QNX Software Development Platform (SDP) 8.0, and release notes that describe the supported features and hardware as well as any known issues for each BSP.

  3. NXP

  4. Variscite i.MX8MP DART

  5. User's Guide

  6. BSP-specific Drivers and Utilities

  • QNX SDP 8.0 BSP Documentation

    The board support package (BSP) documentation includes user guides that describe how to work with the BSPs provided for the QNX Software Development Platform (SDP) 8.0, and release notes that describe the supported features and hardware as well as any known issues for each BSP.

    • AMD

    • Broadcom

    • Intel

    • NXP

      • NXP i.MX 8M Plus

      • NXP i.MX 8 QuadMax MEK

      • NXP i.MX93 EVK

      • NXP S32G399A RDB3

      • Phytec phyBOARD-NASH-i.MX93

      • SolidRun Honeycomb LX2

      • NXP i.MX95 EVK

      • Toradex Apalis i.MX8QM Ixora

      • Toradex Verdin i.MX8MP

      • Variscite i.MX8MP DART

        • Release Notes

        • User's Guide

          • Before You Begin

            Before you begin working with this BSP, you should become familiar with the resources available to you.

          • About This BSP

            These notes list what's included in the BSP, and identify the host OSs and boards it supports.

          • Installation Notes

            These installation notes describe how to build, work with, and run this BSP.

          • Driver Commands

            The tables below provide a summary of driver commands for the Xilinx KD240.

          • BSP-specific Drivers and Utilities

            • i2c-imx

              Driver for inter-integrated circuits on the Xilinx Zynq UltraScale+ MPSoC KD240 Evaluation Kit.

            • rtc

              Set or get date from realtime clock (QNX OS)

            • devcan-flexcan

              CAN driver for FlexCAN Controller

            • devc-sermx1

              Serial driver for the i.MX 8 boards.

            • spi-ecspi

              Enhanced Serial Peripheral Interface (SPI) driver

            • devb-sdmmc-mx8x

              Driver for the SDHI memory card, MMC, and eMMC devices.

            • devu-hcd-imx8-xhci.so

              Driver for Extensible Host Controller Interface (XHCI) USB controllers on NXP i.MX8 board variants

            • devs-dwceqos.so

              Driver for the Synopsys DWC Ethernet-Quality-of-Service (QoS) MAC controller

            • gpio-imx8mp

              Resource manager that provides access to the NXP i.MX8-based GPIOs

            • wdtkick

              The watchdog timer for the i.MX8 boards

            • libmu-imx8.so

              The Messaging Unit (MU) library is intended to be used by other drivers for messaging

    • Texas Instruments

    • Generic Information

  • Typographical Conventions, Support, and Licensing

    This section describes the typographical conventions used throughout the documentation, explains how to obtain technical support, and provides some information about licensing.

BSP-specific Drivers and Utilities

QNX Board Support Packages8.0BSP User's GuideVariscite i.MX8M+ DartNXPNXPARM

These are the specific drivers and utilities for this BSP.

  • i2c-imx
  • rtc
  • devcan-flexcan
  • devc-sermx1
  • spi-ecspi
  • devb-sdmmc-mx8x
  • devu-hcd-imx8-xhci.so
  • devs-dwceqos.so
  • gpio-imx8mp
  • wdtkick
  • libmu-imx8.so
Page updated: February 26, 2026