Jump to main content
Index
Advanced search
  1. Home
  2. QNX SDP 8.0 BSP Documentation

    The board support package (BSP) documentation includes user guides that describe how to work with the BSPs provided for the QNX Software Development Platform (SDP) 8.0, and release notes that describe the supported features and hardware as well as any known issues for each BSP.

  3. NXP

  4. i.MX 8M Plus

  5. User's Guide

  6. BSP-specific Drivers and Utilities

  • QNX SDP 8.0 BSP Documentation

    The board support package (BSP) documentation includes user guides that describe how to work with the BSPs provided for the QNX Software Development Platform (SDP) 8.0, and release notes that describe the supported features and hardware as well as any known issues for each BSP.

    • AMD

    • Broadcom

    • Intel

    • NXP

      • i.MX 8M Plus

        • Release Notes

        • Graphics Release Notes

          This document lists the details, updates, and issues associated with this screen board support release.

        • User's Guide

          • Before You Begin

            Before you begin working with this BSP, you should become familiar with the resources available to you.

          • About This BSP

            This chapter lists what's included in the BSP, the supported host system operating systems, and other relevant information to use this BSP.

          • Installation Notes

            These installation notes describe how to build, work with, and run this BSP.

          • Build the BSP

            You can use the QNX Momentics IDE or the commandline on Linux, or Windows to build an image.

          • Using the Screen Graphics Subsystem

            The default buildfile (kd240.build that's provided with this BSP doesn't build an image that starts the Screen Graphics Subsystem (Screen). Instead, you must use the image that's built from the imx8mp-evk-graphics.build file, which starts Screen automatically.

          • Driver Commands

            The tables below provide a summary of driver commands for the Xilinx KD240.

          • BSP-specific Drivers and Utilities

            • devcan-flexcan

              CAN driver for FLexCAN Controller

            • devc-sermx1

              Serial driver for the i.MX 8 boards.

            • devf-nxp-fspi

              Fast Flash File System v3 (POSIX compatible)

            • devs-dwceqos.so

              Driver for the Synopsys DWC Ethernet-Quality-of-Service (QoS) MAC controller

            • devs-ffec.so

              Driver for Freescale Fast Ethernet Controller

            • devu-hcd-imx8-xhci.so

              Driver for Extensible Host Controller Interface (XHCI) USB controllers on NXP i.MX8 board variants

            • i2c-imx

              Driver for inter-integrated circuits on the Xilinx Zynq UltraScale+ MPSoC KD240 Evaluation Kit.

            • libmu-mx8.so

              The Messaging Unit (MU) library is intended to be used by other drivers for messaging

            • spi-ecspi

              Enhanced Serial Peripheral Interface (SPI) driver

      • i.MX 8 QuadMax MEK

      • i.MX93 EVK

      • Phytec phyBOARD-NASH-i.MX93

      • SolidRun Honeycomb LX2

      • Toradex Apalis i.MX8QM Ixora

      • Toradex Verdin i.MX8MP

      • Variscite i.MX8MP DART

    • Texas Instruments

  • Typographical Conventions, Support, and Licensing

    This section describes the typographical conventions used throughout the documentation, explains how to obtain technical support, and provides some information about licensing.

BSP-specific Drivers and Utilities

These are the specific drivers and utilities for this BSP.

  • devcan-flexcan
  • devc-sermx1
  • devf-nxp-fspi
  • devs-dwceqos.so
  • devs-ffec.so
  • devu-hcd-imx8-xhci.so
  • i2c-imx
  • libmu-mx8.so
  • spi-ecspi
Page updated: September 26, 2025