About This Guide

This guide contains installation and start-up instructions for the QNX Board Support Package (BSP) for the NXP i.MX 8M Plus EVK board. Only 64-bit support is provided by QNX Software Systems. This BSP doesn't provide 32-bit support for any of the boards.

For convenience, this document refers to the NXP i.MX 8M Plus EVK board as the i.MX 8MP EVK board. This guide covers the following information:
  • an overview of the BSP for the i.MX 8MP EVK board
  • the structure and contents of the BSP
  • how to build the BSP using commandline or the QNX Momentics IDE
  • how to prepare a bootable SD
  • how to transfer the image to a bootable SD, eMMC device, and xSPI flash
  • how to boot your board
To find out about: See:
The resources available to you, and what you should know before starting to work with this BSP Before You Begin
What's included in the BSP, and the supported host OSs and boards About This BSP
Booting the reference board with the provided reference image Installation Notes
Building this BSP Build the BSP
Running the driver commands Driver Commands

Copyright and patent notice
Copyright © 2025, BlackBerry Limited. All rights reserved.
Page updated: