Home
QNX SDP 8.0 BSP Documentation
The board support package (BSP) documentation includes user guides that describe how to work with the BSPs provided for the QNX Software Development Platform (SDP) 8.0, and release notes that describe the supported features and hardware as well as any known issues for each BSP.
NXP
SolidRun Honeycomb LX2
User's Guide
Installation Notes
These installation notes describe how to build, work with, and run this BSP.
Set up the hardware
System Layout
The following is the memory layout required for the Xilinx KD240.

QNX SDP 8.0 BSP Documentation
The board support package (BSP) documentation includes user guides that describe how to work with the BSPs provided for the QNX Software Development Platform (SDP) 8.0, and release notes that describe the supported features and hardware as well as any known issues for each BSP.
- AMD
- Broadcom
- Intel
- NXP
  - i.MX 8M Plus
  - i.MX 8 QuadMax MEK
  - i.MX93 EVK
  - Phytec phyBOARD-NASH-i.MX93
  - SolidRun Honeycomb LX2
    - Release Notes
    - User's Guide
      - Before You Begin
        Before you begin working with this BSP, you should become familiar with the resources available to you.
      - About This BSP
        These notes list what's included in the BSP, and identify the host OSs and boards it supports.
      - Installation Notes
        These installation notes describe how to build, work with, and run this BSP.
        Download and set up the BSP
        You can download Board Support Packages (BSPs) using the QNX Software Center.
        Set up the hardware
        System Layout
        The following is the memory layout required for the Xilinx KD240.
        Prepare a bootable microSD card
        You can prepare a bootable microSD card on a Linux, or Windows host system. We recommend that you use Class 10 (or UHS-1) microSD cards.
        Preparing the microSD to boot the board
        You can prepare your microSD to boot using U-Boot.
        Boot using U-Boot
      - Build the BSP
        You can use the QNX Momentics IDE or the commandline on Linux or Windows to build an image.
      - Driver Commands
        The tables below provide a summary of driver commands for the Xilinx KD240.
      - BSP-specific Drivers and Utilities
  - Toradex Apalis i.MX8QM Ixora
  - Toradex Verdin i.MX8MP
  - Variscite i.MX8MP DART
- Texas Instruments
Typographical Conventions, Support, and Licensing
This section describes the typographical conventions used throughout the documentation, explains how to obtain technical support, and provides some information about licensing.

System Layout

The following is the memory layout required for the Honeycomb LX2.

The table below shows the memory layout for the BSP image:


Item	Start	End
OS image location	`0x80200000`

Page updated: September 26, 2025