Before You Begin
Before you begin working with this BSP, you should become familiar with the resources available to you.
Essential information
Before you install your BSP, review the following documentation:
- Information about your board's hardware and firmware provided by the vendor of the board. Documentation for the Honeycomb LX2 Workstation can be found on the SolidRun website at HONEYCOMB LX2 WORKSTATION.
- Building Embedded Systems. This guide contains general information about working with BSPs from QNX Software Systems that's common to all BSPs and is available from the QNX Software Development Platform 8.0 documentation.
Required software
To work with this BSP, you require the following:
- BSP ZIP file for the board.
- QNX Software Development Platform 8.0 installed on a Linux or Windows host system.
- Virtual COM Port (VCP) Driver. This driver must be installed on your host system that connects to the board. To get the driver and read more information about it, see the Future Technology Devices International Ltd. (FTDI) website at http://www.ftdichip.com/FTDrivers.htm.
- A terminal emulation program (Qtalk, Hyperterminal, PuTTy, etc.) to connect
to the board for debugging. Alternatively, you can use
ssh
session from the QNX Momentics IDE.
Page updated: