Home
QNX SDP 8.0 BSP Documentation
The board support package (BSP) documentation includes user guides that describe how to work with the BSPs provided for the QNX Software Development Platform (SDP) 8.0, and release notes that describe the supported features and hardware as well as any known issues for each BSP.
NXP
SolidRun Honeycomb LX2
User's Guide

QNX SDP 8.0 BSP Documentation
The board support package (BSP) documentation includes user guides that describe how to work with the BSPs provided for the QNX Software Development Platform (SDP) 8.0, and release notes that describe the supported features and hardware as well as any known issues for each BSP.
- AMD
- Broadcom
- Intel
- NXP
  - i.MX 8M Plus
  - i.MX 8 QuadMax MEK
  - i.MX93 EVK
  - Phytec phyBOARD-NASH-i.MX93
  - SolidRun Honeycomb LX2
    - Release Notes
    - User's Guide
      - Before You Begin
        Before you begin working with this BSP, you should become familiar with the resources available to you.
      - About This BSP
        These notes list what's included in the BSP, and identify the host OSs and boards it supports.
      - Installation Notes
        These installation notes describe how to build, work with, and run this BSP.
      - Build the BSP
        You can use the QNX Momentics IDE or the commandline on Linux or Windows to build an image.
      - Driver Commands
        The tables below provide a summary of driver commands for the Xilinx KD240.
      - BSP-specific Drivers and Utilities
  - Toradex Apalis i.MX8QM Ixora
  - Toradex Verdin i.MX8MP
  - Variscite i.MX8MP DART
- Texas Instruments
Typographical Conventions, Support, and Licensing
This section describes the typographical conventions used throughout the documentation, explains how to obtain technical support, and provides some information about licensing.

About This Guide

This guide contains installation and start-up instructions for the QNX Board Support Package (BSP) for the Honeycomb LX2 Workstation. This BSP supports Honeycomb LX2 Workstation. Only 64-bit support is provided by QNX Software Systems.

For convenience, this document refers to the Honeycomb LX2 Workstation as the Honeycomb LX2. This guide covers the following information:

an overview of the BSP for the Honeycomb LX2
structure and contents of the BSP
how to build the BSP using commandline or the QNX Momentics IDE
how to prepare a bootable microSD card
how to transfer the image to a bootable microSD card
how to boot your board


To find out about:	See:
The resources available to you, and what you should know before starting to work with this BSP	Before You Begin
What's included in the BSP, and the supported host OSs and boards	About This BSP
Booting the reference board with the provided reference image	Installation Notes
Building this BSP	Build the BSP
Running the driver commands	Driver Commands

Copyright and patent notice
Copyright © 2025, BlackBerry Limited. All rights reserved.

Page updated: September 26, 2025