About This Guide
This guide contains installation and start-up instructions for the QNX Board Support Package (BSP) for the Texas Instruments Jacinto 7 J784S4 Evaluation Module. Only 64-bit support is provided by QNX Software Systems.
For convenience, this document refers to the Texas Instruments Jacinto 7 J784S4 Evaluation Module as the Jacinto 7 J784S4 EVM. This guide covers the following information:
- an overview of the BSP for the Jacinto 7 J784S4 EVM
- the structure and contents of the BSP
- how to build the BSP using commandline or the QNX Momentics IDE
- how to prepare a bootable microSD card
- how to boot your board
| To find out about: | See: |
|---|---|
| The resources available to you, and what you should know before starting to work with this BSP | Before you begin |
| What's included in the BSP, and supported host OSs and boards | About this BSP |
| Booting the reference board with the provided reference image | Installation Notes |
| Preparing the boot images | Preparing the microSD to boot the board |
| Building this BSP | Build the BSP |
| Running the driver commands | Driver Commands |
Page updated:
