Home
QNX SDP 8.0 BSP Documentation
The board support package (BSP) documentation includes user guides that describe how to work with the BSPs provided for the QNX Software Development Platform (SDP) 8.0, and release notes that describe the supported features and hardware as well as any known issues for each BSP.
NXP
Toradex Verdin i.MX8MP
User's Guide
Installation Notes
These installation notes describe how to build, work with, and run this BSP.
Set up the hardware
System Layout
The following is the memory layout required for the Xilinx KD240

QNX SDP 8.0 BSP Documentation
The board support package (BSP) documentation includes user guides that describe how to work with the BSPs provided for the QNX Software Development Platform (SDP) 8.0, and release notes that describe the supported features and hardware as well as any known issues for each BSP.
- AMD
- Broadcom
- Intel
- NXP
  - NXP i.MX 8M Plus
  - NXP i.MX 8 QuadMax MEK
  - NXP i.MX93 EVK
  - NXP S32G399A RDB3
  - Phytec phyBOARD-NASH-i.MX93
  - SolidRun Honeycomb LX2
  - NXP i.MX95 EVK
  - Toradex Apalis i.MX8QM Ixora
  - Toradex Verdin i.MX8MP
    - Release Notes
      The current Release Notes and the summaries for previous releases of the Toradex Verdin i.MX8M Plus BSP have been combined. Find build information and track issues across build package releases below.
    - User's Guide
      - Before You Begin
        Before you begin working with this BSP, you should become familiar with the resources available to you.
      - About This BSP
        These notes list what's included in the BSP, and identify the host OSs and boards it supports.
      - Installation Notes
        These installation notes describe how to build, work with, and run this BSP.
        Download and set up the BSP
        You can download Board Support Packages (BSPs) using the QNX Software Center.
        Set up the hardware
        System Layout
        The following is the memory layout required for the Xilinx KD240
        Build the BSP
        You can use the QNX Momentics IDE or the command line on Linux or Windows to build an image.
        Prepare microSD to install QNX IFS
        You can manually install QNX OS on the board. A FAT32-formatted microSD is required. Using the microSD is the easiest way to transfer images from your host computer to the eMMC on the board.
        Install QNX IFS
        To manually install QNX OS, you need to copy the QNX IFS image from the microSD to the internal storage on the board (e.g.: eMMC).
      - Driver Commands
        The tables below provide a summary of driver commands for the Xilinx KD240.
      - BSP-specific Drivers and Utilities
  - Variscite i.MX8MP DART
- Texas Instruments
- Generic Information
Typographical Conventions, Support, and Licensing
This section describes the typographical conventions used throughout the documentation, explains how to obtain technical support, and provides some information about licensing.

System Layout

QNX Board Support Packages8.0BSP User's GuideVerdin i.MX8M+ SOM and Dahlia Carrier BoardToradexNXPARM

The following is the memory layout required for the Verdin i.MX 8M Plus Dahlia

The table below shows the memory layout for the BSP image:


Item	Start	End
OS image location	`0x40800000`

Page updated: February 26, 2026