About This Guide
This guide contains installation and start-up instructions for the QNX Board Support Package (BSP) for the Toradex Verdin i.MX 8M Plus Dahlia Board. Only 64-bit support is provided by QNX. This BSP doesn't provide 32-bit support for any of the boards.
For convenience, this document refers to the Toradex Verdin i.MX 8M Plus Dahlia Board as
the Verdin i.MX 8M Plus Dahlia. This guide covers the following
information:
- an overview of the BSP for the Verdin i.MX 8M Plus Dahlia
- structure and contents of the BSP
- how to build the BSP using command line or the QNX Momentics IDE
- how to transfer the images to a microSD card and use them to boot the board
To find out about: | See: |
---|---|
The resources available to you, what you should know before starting to work with this BSP, and required software | Before You Begin |
What's included in the BSP, the supported host OSs and boards | About This BSP |
Booting the reference board with the provided image in this BSP | Installation Notes |
Building this BSP | Build the BSP |
Running the driver commands | Driver Commands |
Copyright and patent notice
Copyright © 2025, BlackBerry Limited. All rights reserved.
Page updated: