Home
QNX SDP 8.0 BSP Documentation
The board support package (BSP) documentation includes user guides that describe how to work with the BSPs provided for the QNX Software Development Platform (SDP) 8.0, and release notes that describe the supported features and hardware as well as any known issues for each BSP.
AMD
AMD Ryzen Sapphire Edge x86
User's Guide
Installation Notes
These installation notes describe how to install and boot a board using this BSP.
Working with the hardware
You must attach the appropriate connectors to your hardware.
System Layout
The following is the memory layout required for the Xilinx KD240

QNX SDP 8.0 BSP Documentation
The board support package (BSP) documentation includes user guides that describe how to work with the BSPs provided for the QNX Software Development Platform (SDP) 8.0, and release notes that describe the supported features and hardware as well as any known issues for each BSP.
- AMD
  - Xilinx Zynq UltraScale+ MPSoC KD240
  - Xilinx Zynq UltraScale+ MPSoC KR260
  - Xilinx Zynq UltraScale+ MPSoC KV260
  - AMD Ryzen Sapphire Edge x86
    - Release Notes
      This document lists the details, updates, and issues associated with this BSP release.
    - User's Guide
      - About This Guide
      - Before You Begin
        Before you begin working with this BSP, you should become familiar with the resources available to you to work with QNX embedded systems.
      - About This BSP
        This chapter lists what's included in the BSP, the supported host system operating systems, and other relevant information to use this BSP.
      - Installation Notes
        These installation notes describe how to install and boot a board using this BSP.
        Download and set up the BSP
        You can download Board Support Packages (BSPs) using the QNX Software Center.
        Working with the hardware
        You must attach the appropriate connectors to your hardware.
        System Layout
        The following is the memory layout required for the Xilinx KD240
        Build the BSP
        You can use the QNX Momentics IDE or the commandline on Linux or Windows to build an image.
        Create and transfer an image to a bootable USB device
        You can transfer the provided prebuilt IFS image to your USB device.
        Boot the target
        After you've transferred your image to a bootable USB device, you can use it to boot the QNX OS on the system.
        QNX on Xilinx Zynq UltraScale+ MPSoC KD240 Evaluation Kit
      - Driver Commands
        The tables below provide a summary of driver commands for the Xilinx Zynq UltraScale+ MPSoC KD240 Evaluation Kit.
      - BSP-specific Drivers and Utilities
  - Xilinx Zynq ZCU10x
- Broadcom
- Intel
- NXP
- Texas Instruments
- Generic Information
Typographical Conventions, Support, and Licensing
This section describes the typographical conventions used throughout the documentation, explains how to obtain technical support, and provides some information about licensing.

System Layout

QNX Board Support Packages8.0BSP User's GuideAMD Sapphire Ryzen EdgeAMDAMDx86

The following is the memory layout required for the AMD Ryzen V2000 Sapphire IPC-FP6

The table below shows the memory layout for the BSP image:


Item	Start	End
OS image location	`0x2000000`

Page updated: December 09, 2025