Home
QNX SDP 8.0 BSP Documentation
The board support package (BSP) documentation includes user guides that describe how to work with the BSPs provided for the QNX Software Development Platform (SDP) 8.0, and release notes that describe the supported features and hardware as well as any known issues for each BSP.
AMD
AMD Ryzen Sapphire Edge x86
User's Guide

QNX SDP 8.0 BSP Documentation
The board support package (BSP) documentation includes user guides that describe how to work with the BSPs provided for the QNX Software Development Platform (SDP) 8.0, and release notes that describe the supported features and hardware as well as any known issues for each BSP.
- AMD
  - Xilinx Zynq UltraScale+ MPSoC KD240
  - Xilinx Zynq UltraScale+ MPSoC KR260
  - Xilinx Zynq UltraScale+ MPSoC KV260
  - AMD Ryzen Sapphire Edge x86
    - Release Notes
      This document lists the details, updates, and issues associated with this BSP release.
    - User's Guide
      - About This Guide
      - Before You Begin
        Before you begin working with this BSP, you should become familiar with the resources available to you to work with QNX embedded systems.
      - About This BSP
        This chapter lists what's included in the BSP, the supported host system operating systems, and other relevant information to use this BSP.
      - Installation Notes
        These installation notes describe how to install and boot a board using this BSP.
      - Driver Commands
        The tables below provide a summary of driver commands for the Xilinx Zynq UltraScale+ MPSoC KD240 Evaluation Kit.
      - BSP-specific Drivers and Utilities
  - Xilinx Zynq ZCU10x
- Broadcom
- Intel
- NXP
- Texas Instruments
- Generic Information
Typographical Conventions, Support, and Licensing
This section describes the typographical conventions used throughout the documentation, explains how to obtain technical support, and provides some information about licensing.

About This Guide

QNX Board Support Packages8.0BSP User's GuideAMD Sapphire Ryzen EdgeAMDAMDx86

This guide contains installation and start-up instructions for the QNX Board Support Package (BSP) for the AMD Ryzen V2000 Sapphire IPC-FP6 Board. Only 64-bit support is provided by QNX. This BSP doesn't provide 32-bit support for any of the boards.

For convenience, this document refers to the AMD Ryzen V2000 Sapphire IPC-FP6 Board as the AMD Ryzen V2000 Sapphire IPC-FP6. This guide covers the following information:

an overview of QNX BSP for the AMD Ryzen V2000 Sapphire IPC-FP6
links to documentation about how to build QNX embedded systems, which you should read before you begin working with this BSP
structure and contents of the BSP
how to prepare a bootable USB device (e.g., USB memory stick)
how to install the BSP and boot it on a board
how to build the BSP using command line or the QNX Momentics IDE


To find out about:	See:
The resources available to you, and what you should know before starting to work with this BSP, and required software	Before You Begin
What's included in the BSP, supported host operating systems, and boards	About This BSP
Installing this BSP	Installation Notes
Building this BSP	Build the BSP
Driver commands	Driver Commands

Page updated: December 09, 2025