About This Guide
This guide contains installation and start-up instructions for the QNX Board Support Package (BSP) for the Phytec phyBOARD NASH. Only 64-bit support is provided by QNX. This BSP doesn't provide 32-bit support for any of the boards.
For convenience, this document refers to the Phytec phyBOARD NASH as
the phyBOARD-NASH. This guide covers the following
information:
- an overview of the BSP for the phyBOARD-NASH
- structure and contents of the BSP
- how to build the BSP using command line or the QNX Momentics IDE
- how to transfer the images to a microSD card and use them to boot the board
To find out about: | See: |
---|---|
The resources available to you, what you should know before starting to work with this BSP, and required software | Before You Begin |
What's included in the BSP, the supported host OSs and boards | About This BSP |
Booting the reference board with the provided image in this BSP | Installation Notes |
Building this BSP | Build the BSP |
Running the driver commands | Driver Commands |
Copyright and patent notice
Copyright © 2025, BlackBerry Limited. All rights reserved.
Page updated: