Home
QNX SDP 8.0 BSP Documentation
The board support package (BSP) documentation includes user guides that describe how to work with the BSPs provided for the QNX Software Development Platform (SDP) 8.0, and release notes that describe the supported features and hardware as well as any known issues for each BSP.
NXP
S32G399A RDB3
User's Guide
Before You Begin
Before you begin working with this BSP, you should become familiar with the resources available to you.

QNX SDP 8.0 BSP Documentation
The board support package (BSP) documentation includes user guides that describe how to work with the BSPs provided for the QNX Software Development Platform (SDP) 8.0, and release notes that describe the supported features and hardware as well as any known issues for each BSP.
- AMD
- Broadcom
- Intel
- NXP
  - i.MX 8M Plus
  - i.MX 8 QuadMax MEK
  - i.MX93 EVK
  - S32G399A RDB3
    - Release Notes
      This document lists the details, updates, and issues associated with this BSP release.
    - User's Guide
      - Before You Begin
        Before you begin working with this BSP, you should become familiar with the resources available to you.
      - About This BSP
        These notes list what's included in the BSP, and identify the host OSs and boards it supports.
      - Installation Notes
        These installation notes describe how to build, work with, and run this BSP.
      - Build the BSP
        You can use the QNX Momentics IDE or the commandline on Linux or Windows to build an image.
      - Driver Commands
        The tables below provide a summary of driver commands for the Xilinx KD240.
      - BSP-specific Drivers and Utilities
  - Phytec phyBOARD-NASH-i.MX93
  - SolidRun Honeycomb LX2
  - Toradex Apalis i.MX8QM Ixora
  - Toradex Verdin i.MX8MP
  - Variscite i.MX8MP DART
- Texas Instruments
- Generic Information
Typographical Conventions, Support, and Licensing
This section describes the typographical conventions used throughout the documentation, explains how to obtain technical support, and provides some information about licensing.

Before You Begin

QNX Board Support Packages8.0BSP User's GuideNXP S32G399 RDB3NXPNXPARM

Before you begin working with this BSP, you should become familiar with the resources available to you.

Essential information

Before you install your BSP, review the following documentation:

Information about your board's hardware and firmware provided by the vendor of the board.The Documentation for the S32G-VNP-RDB3 can be found on the NXP website at S32G399A Vehicle Networking Reference Design (S32G-VNP-RDB3)
Building Embedded Systems, which contains general information about working with BSPs from QNX Software Systems that's common to all BSPs and is available from the QNX Software Development Platform 8.0 documentation

Required software

To work with the BSP for the NXP S32G-VNP-RDB3 board, you require the following:

BSP ZIP file for the board.
QNX Software Development Platform 8.0 installed on a Linux or Windows host system.
Virtual COM Port (VCP) Driver. This driver must be installed on your host system that connects to the board. To get the driver and read more information about it, see the Future Technology Devices International Ltd. (FTDI) website at http://www.ftdichip.com/FTDrivers.htm.
A terminal emulation program (Qtalk, Hyperterminal, PuTTy, etc.) to connect to the board for debugging. Alternatively, you can use a ssh session from the QNX Momentics IDE.
To boot QNX OS on a S32G-VNP-RDB3 board , you require the fip.s32-sdcard and s32g399a-rdb3.dtb binary from NXP_SW32G3-LINUX-EAR Linux EAR V38.0. To get these binaries, create an account with NXP, contact NXP to obtain the appropriate access, and then go to: https://www.nxp.com/products/S32G3

Page updated: January 15, 2026