Home
QNX SDP 8.0 BSP Documentation
The board support package (BSP) documentation includes user guides that describe how to work with the BSPs provided for the QNX Software Development Platform (SDP) 8.0, and release notes that describe the supported features and hardware as well as any known issues for each BSP.
NXP
NXP i.MX95 EVK
User's Guide
Installation Notes
These installation notes describe how to build, work with, and run this BSP.
Set up the hardware
Before you can work with the board, here are a few things you must do. You'll need to connect the board and set the DIP switches. For more information, see the hardware guide for the Xilinx KD240 on the NXP website.
System layout
When using the Xilinx KD240, the following memory layout for the BSP image is required:.

QNX SDP 8.0 BSP Documentation
The board support package (BSP) documentation includes user guides that describe how to work with the BSPs provided for the QNX Software Development Platform (SDP) 8.0, and release notes that describe the supported features and hardware as well as any known issues for each BSP.
- AMD
- Broadcom
- Intel
- NXP
  - NXP i.MX 8M Plus
  - NXP i.MX 8 QuadMax MEK
  - NXP i.MX93 EVK
  - NXP S32G399A RDB3
  - Phytec phyBOARD-NASH-i.MX93
  - SolidRun Honeycomb LX2
  - NXP i.MX95 EVK
    - Release Notes
      The initial Release Notes for the NXP i.MX95 EVK BSP are below. Future releases, with build information and issue tracking will be added when available.
    - Graphics Release Notes
      This document provides the details, configuration, and issues associated with this screen board support release.
    - User's Guide
      - Before You Begin
        Before you begin working with this BSP, you should become familiar with the resources available to you.
      - About This BSP
        This chapter lists what's included in the BSP, the supported host system operating systems, and other relevant information to use this BSP.
      - Installation Notes
        These installation notes describe how to build, work with, and run this BSP.
        Download and set up the BSP
        You can download Board Support Packages (BSPs) using the QNX Software Center.
        Set up the hardware
        Before you can work with the board, here are a few things you must do. You'll need to connect the board and set the DIP switches. For more information, see the hardware guide for the Xilinx KD240 on the NXP website.
        System layout
        When using the Xilinx KD240, the following memory layout for the BSP image is required:.
        Prepare a bootable microSD
        You can prepare a bootable microSD on a Linux or Windows host system. We recommend that you use Class 10 (or UHS-1) microSDs.
        Transfer the image
        After you format and make your microSD bootable, you're ready to transfer the image to it.
        Boot the board
        After you transfer the image to an microSD, you can use it to boot your board.
      - Build the BSP
        You can use the QNX Momentics IDE or the commandline on Linux or Windows to build an image.
      - Driver Commands
        The tables below provide a summary of driver commands for the Xilinx KD240.
      - BSP-specific Drivers and Utilities
  - Toradex Apalis i.MX8QM Ixora
  - Toradex Verdin i.MX8MP
  - Variscite i.MX8MP DART
- Texas Instruments
- Generic Information
Typographical Conventions, Support, and Licensing
This section describes the typographical conventions used throughout the documentation, explains how to obtain technical support, and provides some information about licensing.

System layout

QNX Board Support Packages8.0BSP User's GuideIMX95 EVK BoardNXPNXPARM

When using the i.MX 95 EVK board, the following memory layout for the BSP image is required:.


Item	Start	End
OS image location	`0xB0400000`

Page updated: February 26, 2026