Home
QNX SDP 8.0 BSP Documentation
The board support package (BSP) documentation includes user guides that describe how to work with the BSPs provided for the QNX Software Development Platform (SDP) 8.0, and release notes that describe the supported features and hardware as well as any known issues for each BSP.
Texas Instruments
TI AM62a Starter Kit Evaluation Module
User's Guide
BSP-specific Drivers and Utilities

QNX SDP 8.0 BSP Documentation
The board support package (BSP) documentation includes user guides that describe how to work with the BSPs provided for the QNX Software Development Platform (SDP) 8.0, and release notes that describe the supported features and hardware as well as any known issues for each BSP.
- AMD
- Broadcom
- Intel
- NXP
- Texas Instruments
  - TI Jacinto 7 J721E (DRA829/TDA4xM) Evaluation Module
  - TI Jacinto 7 TDA4VM Starter Kit
  - TI Jacinto 7 J721S2 Evaluation Module
  - TI J722S Evaluation Module
  - TI Jacinto 7 J742S2 Evaluation Module
  - TI Jacinto 7 J784S4 Evaluation Module
  - TI AM62a Starter Kit Evaluation Module
    - Release Notes
    - Graphics Release Notes
      This document lists the details, updates, and issues associated with this screen board support release.
    - User's Guide
      - Before you begin
        Before you begin working with this BSP you should become familiar with the resources available to you when building QNX embedded systems.
      - About this BSP
        This chapter lists what's included in the BSP, the supported host system operating systems, and other relevant information to use this BSP.
      - Installation Notes
        These installation notes describe how to use this BSP to boot your board with the QNX OS.
      - Build the BSP
        You can use the QNX Momentics IDE or the commandline on Linux or Windows to build an image.
      - Configure the Screen Graphics Subsystem
        The default buildfile (kd240.build) that's provided with this BSP doesn't build an image that starts the Screen Graphics Subsystem (Screen). Instead, you must use the image that's built from the am62a-evm-graphics.build file, which starts Screen automatically.
      - Driver Commands
        The tables below provide a summary of driver commands.
      - BSP-specific Drivers and Utilities
        devc-seromap
        Serial driver for the Texas Instruments boards.
        i2c-tda4
        Driver for inter-integrated circuits on the Xilinx Zynq UltraScale+ MPSoC KD240 Evaluation Kit.
        devs-cpsw-am62a.so
        Driver for Texas Instruments Common Platform Ethernet Switch (CPSW) J7/AM62 devices
        devu-hcd-dwc3-xhci.so
        Driver for eXtensible Host Controller Interface (xHCI) USB controllers
  - TI AM62p Starter Kit Evaluation Module
  - TI AM62x Starter Kit Evaluation Module
- Generic Information
Typographical Conventions, Support, and Licensing
This section describes the typographical conventions used throughout the documentation, explains how to obtain technical support, and provides some information about licensing.

BSP-specific Drivers and Utilities

QNX Board Support Packages8.0BSP User's GuideTI Sitara AM62A Starter Kit EVMTexas InstrumentsTexas InstrumentsARM

These are the specific drivers and utilities for this BSP.

Page updated: February 26, 2026