Home
QNX SDP 8.0 BSP Documentation
The board support package (BSP) documentation includes user guides that describe how to work with the BSPs provided for the QNX Software Development Platform (SDP) 8.0, and release notes that describe the supported features and hardware as well as any known issues for each BSP.
AMD
Xilinx Zynq UltraScale+ MPSoC KR260
User's Guide

QNX SDP 8.0 BSP Documentation
The board support package (BSP) documentation includes user guides that describe how to work with the BSPs provided for the QNX Software Development Platform (SDP) 8.0, and release notes that describe the supported features and hardware as well as any known issues for each BSP.
- AMD
  - Xilinx Zynq UltraScale+ MPSoC KD240
  - Xilinx Zynq UltraScale+ MPSoC KR260
    - Release Notes
    - Graphics Release Notes
      This document lists the details, updates, and issues associated with this screen board support release.
    - User's Guide
      - Before You Begin
        Before you begin working with this BSP you should become familiar with the resources available to you when building QNX embedded systems.
      - About This BSP
        This chapter lists what's included in the BSP, the supported host system operating systems, and other relevant information to use this BSP.
      - Installation Notes
        These installation notes describe how to use this BSP to boot your board with the QNX OS.
      - Build the BSP
        You can use the QNX Momentics IDE or the commandline on Linux or Windows to build an image.
      - Driver Commands
        The tables below provide a summary of driver commands.
      - BSP-specific Drivers and Utilities
  - Xilinx Zynq UltraScale+ MPSoC KV260
  - Xilinx Zynq ZCU10x
- Broadcom
- Intel
- NXP
- Texas Instruments
Typographical Conventions, Support, and Licensing
This section describes the typographical conventions used throughout the documentation, explains how to obtain technical support, and provides some information about licensing.

About This Guide

This guide contains installation and start-up instructions for the QNX Board Support Package (BSP) for the Xilinx Zynq UltraScale+ MPSoC KR260 Evaluation Kit. Only 64-bit support is provided by QNX Software Systems.

For convenience, this document refers to the Xilinx Zynq UltraScale+ MPSoC KR260 Evaluation Kit as the Xilinx KR260. This guide covers the following information:

an overview of the BSP for the Xilinx KR260
the structure and contents of the BSP
how to build the BSP using commandline or the QNX Momentics IDE
how to prepare a bootable microSD
how to boot your board


To find out about:	See:
The resources available to you, and what you should know before starting to work with this BSP	Before You Begin
What's included in the BSP, and supported host OSs and boards	About This BSP
Booting the reference board with the provided reference image	Installation Notes
Building this BSP	Build the BSP
Running the driver commands	Driver Commands

Page updated: October 24, 2025