Home
QNX SDP 8.0 BSP Documentation
The board support package (BSP) documentation includes user guides that describe how to work with the BSPs provided for the QNX Software Development Platform (SDP) 8.0, and release notes that describe the supported features and hardware as well as any known issues for each BSP.
AMD
Xilinx Versal AI Edge VE2302
User's Guide
Installation Notes
These installation notes describe how to use this BSP to boot your board with the QNX OS.
Set up the hardware
System Layout
The following is the memory layout required for the Xilinx Versal AI Edge VE2302 Evalboard

QNX SDP 8.0 BSP Documentation
The board support package (BSP) documentation includes user guides that describe how to work with the BSPs provided for the QNX Software Development Platform (SDP) 8.0, and release notes that describe the supported features and hardware as well as any known issues for each BSP.
- AMD
  - Xilinx Versal AI Edge VE2302
    - Release Notes
      The initial Release Notes for the Xilinx Versal AI Edge VE2302 Evalboard BSP are below. Future releases, with build information and issue tracking will be added when available.
    - User's Guide
      - About This Guide
      - Before You Begin
        Before you begin working with this BSP you should become familiar with the resources available to you when building QNX embedded systems.
      - About This BSP
        This chapter lists what's included in the BSP, the supported host system operating systems, and other relevant information to use this BSP.
      - Installation Notes
        These installation notes describe how to use this BSP to boot your board with the QNX OS.
        Download and set up the BSP
        You can download Board Support Packages (BSPs) using the QNX Software Center.
        Set up the hardware
        System Layout
        The following is the memory layout required for the Xilinx Versal AI Edge VE2302 Evalboard
        Build the BSP
        You can use the QNX Momentics IDE or the commandline on Linux or Windows to build an image.
        Prepare a bootable microSD card
        You can prepare a bootable microSD card on a Linux or Windows host system. We recommend that you use Class 10 (or UHS-1) microSD card cards.
        Prepare the microSD card to install QNX IFS
        You can manually install QNX OS on the board. A FAT32-formatted microSD card is required.
        Install QNX IFS
      - Driver Commands
        The tables below provide a summary of driver commands.
      - BSP-specific Drivers and Utilities
  - Xilinx Zynq UltraScale+ MPSoC KD240
  - Xilinx Zynq UltraScale+ MPSoC KR260
  - Xilinx Zynq UltraScale+ MPSoC KV260
  - AMD Ryzen Sapphire Edge x86
  - Xilinx Zynq ZCU10x
- Broadcom
- Intel
- NXP
- Texas Instruments
- Generic Information
Typographical Conventions, Support, and Licensing
This section describes the typographical conventions used throughout the documentation, explains how to obtain technical support, and provides some information about licensing.

System Layout

QNX Board Support Packages8.0BSP User's GuideAMD Versal AI Edge VE2302AMDAMDARM

The following is the memory layout required for the Xilinx Versal AI Edge VE2302 Evalboard

The table below shows the memory layout for the BSP image:


Item	Start	End
OS image location	`0x100000`

Page updated: March 26, 2026