About This BSP

QNX Board Support Packages8.0BSP User's GuideAMD Versal AI Edge VE2302AMDAMDARM

This chapter lists what's included in the BSP, the supported host system operating systems, and other relevant information to use this BSP.

What's in this BSP

This BSP contains the following components:

For the status of a driver, see the release notes for this BSP.

Component Format Comments
Startup Source and binary
Serial driver Source and binary
SDMMC driver Source and binary
Network driver Binary only
USB driver Binary only
I2C driver Source and binary
RTC utility Binary only Utility to set or get date from real-time clock
Clock manager Source and binary
UART clock utility Source and binary Utility to read serial clock. This utility is required by the serial driver command.
GPIO support library Source and library A library to facilitate the usage of GPIO pins in custom applications

Supported OSs

To install and use this BSP, you must have installed the QNX SDP 8.0 on a Linux or Windows host. This BSP supports the following target OS:
  • QNX OS 8.0

Supported boards

In the QNX Software Center, see the release notes for this BSP for the list of supported boards using these steps:
  1. On the Available or Installed tab, navigate to Board Support Packages BSP, right-click Name_of_your_BSP, and then select Properties.
  2. In the Properties window, on the General Information pane, click the link beside Release Notes.
You should be redirected to the release notes on the QNX website as long as you're logged in with your myQNX account.

Known issues

For the list of known issues, see the release notes for this BSP.

Page updated: