Jump to main content
Index
Advanced search
  1. Home
  2. QNX SDP 8.0 BSP Documentation

    The board support package (BSP) documentation includes user guides that describe how to work with the BSPs provided for the QNX Software Development Platform (SDP) 8.0, and release notes that describe the supported features and hardware as well as any known issues for each BSP.

  3. Broadcom

  4. Raspberry Pi 4 BCM2711

  5. User's Guide

  6. BSP-specific Drivers and Utilities

  • QNX SDP 8.0 BSP Documentation

    The board support package (BSP) documentation includes user guides that describe how to work with the BSPs provided for the QNX Software Development Platform (SDP) 8.0, and release notes that describe the supported features and hardware as well as any known issues for each BSP.

    • AMD

    • Broadcom

      • Raspberry Pi 4 BCM2711

        • Release Notes

        • User's Guide

          • Before You Begin

            Before you begin working with this BSP, you should become familiar with the resources available to you.

          • About This BSP

            These notes list what's included in the BSP, and identify the host OSs and boards it supports.

          • Installation Notes

            These installation notes describe how to build, work with, and run this BSP.

          • Build the BSP

            You can use the QNX Momentics IDE or the commandline on Linux or Windows to build an image.

          • Driver Commands

            The tables below provide a summary of driver commands for the Xilinx KD240.

          • BSP-specific Drivers and Utilities

            • devc-serminiuart

              Serial driver for the mini UART on the Xilinx KD240.

            • devs-genet.so

              Driver for the Raspberry Pi GENET ETHERNET

            • devu-hcd-bcm2711-xhci.so

              Driver for Extensible Host Controller Interface (XHCI) USB controllers on Xilinx KD240 variants

            • i2c-bcm2711

              Driver for inter-integrated circuits on the Xilinx Zynq UltraScale+ MPSoC KD240 Evaluation Kit.

            • spi-bcm2711

              Enhanced Serial Peripheral Interface (SPI)

            • gpio-bcm2711

              GPIO utility for BCM2711 SOC

            • mbox-bcm2711

              Mailbox utility for BCM2711 SOC

    • Intel

    • NXP

    • Texas Instruments

  • Typographical Conventions, Support, and Licensing

    This section describes the typographical conventions used throughout the documentation, explains how to obtain technical support, and provides some information about licensing.

BSP-specific Drivers and Utilities

These are the specific drivers and utilities for this BSP.

  • devc-serminiuart
  • devs-genet.so
  • devu-hcd-bcm2711-xhci.so
  • i2c-bcm2711
  • spi-bcm2711
  • gpio-bcm2711
  • mbox-bcm2711
Page updated: September 26, 2025