Home
QNX SDP 8.0 BSP Documentation
The board support package (BSP) documentation includes user guides that describe how to work with the BSPs provided for the QNX Software Development Platform (SDP) 8.0, and release notes that describe the supported features and hardware as well as any known issues for each BSP.
Broadcom
Raspberry Pi 4 BCM2711
User's Guide
Before You Begin
Before you begin working with this BSP, you should become familiar with the resources available to you.

QNX SDP 8.0 BSP Documentation
The board support package (BSP) documentation includes user guides that describe how to work with the BSPs provided for the QNX Software Development Platform (SDP) 8.0, and release notes that describe the supported features and hardware as well as any known issues for each BSP.
- AMD
- Broadcom
  - Raspberry Pi 4 BCM2711
    - Release Notes
    - User's Guide
      - Before You Begin
        Before you begin working with this BSP, you should become familiar with the resources available to you.
      - About This BSP
        These notes list what's included in the BSP, and identify the host OSs and boards it supports.
      - Installation Notes
        These installation notes describe how to build, work with, and run this BSP.
      - Build the BSP
        You can use the QNX Momentics IDE or the commandline on Linux or Windows to build an image.
      - Driver Commands
        The tables below provide a summary of driver commands for the Xilinx KD240.
      - BSP-specific Drivers and Utilities
- Intel
- NXP
- Texas Instruments
Typographical Conventions, Support, and Licensing
This section describes the typographical conventions used throughout the documentation, explains how to obtain technical support, and provides some information about licensing.

Before You Begin

Before you begin working with this BSP, you should become familiar with the resources available to you.

Essential information

Before you install your BSP, review the following documentation:

Information about your board's hardware and firmware provided by the vendor of the board. Documentation for the Raspberry Pi 4 Board (Model B) can be found on the Raspberry PI website at https://www.raspberrypi.org/products/raspberry-pi-4-model-b/specifications.
Building Embedded Systems. This guide contains general information about working with BSPs from QNX Software Systems that's common to all BSPs and is available from the QNX Software Development Platform 8.0 documentation.

Required software

To work with this BSP, you require the following:

BSP ZIP file for the board.
QNX Software Development Platform 8.0 installed on a Linux or Windows host system.
Virtual COM Port (VCP) Driver. This driver must be installed on your host system that connects to the board. To get the driver and read more information about it, see the Future Technology Devices International Ltd. (FTDI) website at http://www.ftdichip.com/FTDrivers.htm.
A terminal emulation program (Qtalk, Hyperterminal, PuTTy, etc.) to connect to the board for debugging. Alternatively, you can use ssh session from the QNX Momentics IDE.

Page updated: October 24, 2025