About This Guide

This guide contains installation and start-up instructions for the QNX Board Support Package (BSP) for the NXP i.MX 8 QuadMax Multisensory Enablement Kit (MEK). Only 64-bit support is provided by QNX Software Systems. This BSP doesn't provide 32-bit support for any of the boards.

For convenience, this document refers to the NXP i.MX 8 QuadMax Multisensory Enablement Kit (MEK) as the i.MX8QM MEK. This guide covers the following information:
  • an overview of the BSP for the i.MX8QM MEK
  • the structure and contents of the BSP
  • how to build the BSP using commandline or the QNX Momentics IDE
  • how to prepare a bootable SD card
  • how to transfer the image to a bootable SD card, eMMC device, or xSPI flash
  • how to boot your board
To find out about: See:
The resources available to you, and what you should know before starting to work with this BSP Before You Begin
What's included in the BSP, and the supported host OSs and boards About This BSP
Booting the reference board with the provided reference image Installation Notes
Building this BSP Build the BSP
Running the driver commands Driver Commands

Copyright and patent notice
Copyright © 2023, BlackBerry Limited. All rights reserved.
Page updated: