Connect to the Input Events library
QNX SDP8.0Input Events Library ReferenceAPIDeveloperProgramming
Callback functions and capabilities of your touch controller need to be configured and specified, respectively, before connecting to the Input Events library.
Configure callback functions
Assign your driver's callback functions appropriately by using the
structure mtouch_driver_funcs_t
.
For example:
mtouch_driver_funcs_t funcs = {
.get_contact_id = get_contact_id,
.is_contact_down = is_contact_down,
.get_coords = get_coords,
.get_down_count = get_down_count,
.get_touch_width = NULL,
.get_touch_height = NULL,
.get_touch_orientation = NULL,
.get_touch_pressure = NULL,
.get_seq_id = NULL,
.set_event_rate = NULL,
.get_contact_type = NULL,
.get_select = NULL
};
Specify driver parameters
Specify the capabilities that are supported by your driver. Use the
structure mtouch_driver_params_t
.
For example:
mtouch_driver_params_t params = {
.capabilities = MTOUCH_CAPABILITIES_CONTACT_ID |
MTOUCH_CAPABILITIES_COORDS |
MTOUCH_CAPABILITIES_CONTACT_COUNT,
.flags = 0,
.max_touchpoints = 2,
.width = 1312,
.height = 800
};
Connect to the Input Events library
After having assigned your callback functions and having specified your driver parameters, you use the function mtouch_driver_attach() to connect to the Input Events library.
For example:
struct mtouch_device* inputevents_hdl;
inputevents_hdl = mtouch_driver_attach(¶ms, &funcs);
Page updated: