Home
Support

Knowledge Base

BSPs and drivers
Community resources
Product documentation
Questions?
Contact us

How to confirm a system is running startup-apic/pci-bios-v2 vs. startup-bios/pci-bios
 
________________________________________________________________________

Applicable Environment
________________________________________________________________________
  • Topic: How to confirm a system is running start-apic/pci-bios-v2 vs startup-bios/pci-bios?
  • SDP: 6.5.0
  • Target: x86 Targets
________________________________________________________________________

Recommendation
________________________________________________________________________

There are no clear signs that a QNX 6.5.0 system is running startup-apic and pci-bios-v2 vs. startup-bios/pci-bios. If you are wanting to confirm that, e.g. a system has been correctly switched to startup-apic and pci-bios-v2, you can do the following:

Run "pidin syspage=intrinfo". If there is a "vector_base:00000100" the you are running startup-apic and pci-bios-v2.

________________________________________________________________________
NOTE: This entry has been validated against the SDP version listed above. Use caution when considering this advice for any other SDP version. For supported releases, please reach out to QNX Technical Support if you have any questions/concerns.
________________________________________________________________________


Related Attachments
 None Found





Please contact us with your questions or concerns.