Knowledge Base

BSPs and drivers

Community resources

Product documentation

Questions?

Can't install on HP Z200 PC

________________________________________________________________________

Applicable Environment

________________________________________________________________________

Topic: Can't install on HP Z200 PC
SDP: 6.5.0
Target: HP Z200 PC

________________________________________________________________________

Issue

________________________________________________________________________

After booting from the QNX 6.5.0 self-hosted install CD/DVD, the installer says:

"unable to locate 6.1 file system"

This problem may exist on systems other than the HP Z200.

________________________________________________________________________

Recommendation

________________________________________________________________________

In the BIOS settings, try changing SATA mode from native to legacy. This might possibly causes some real-time and/or performance problems relating to System Management Mode, so you try changing the mode back to native after doing the install.

________________________________________________________________________

NOTE: This entry has been validated against the SDP version listed above. Use caution when considering this advice for any other SDP version. For supported releases, please reach out to QNX Technical Support if you have any questions/concerns.

________________________________________________________________________

Related Attachments

None Found

Please contact us with your questions or concerns.