Knowledge Base

BSPs and drivers

Community resources

Product documentation

Questions?

How to add names to the PCI device string database

________________________________________________________________________

Applicable Environment

________________________________________________________________________

Topic: How to add name strings to the PCI device string database
SDP: 8.0.0, 7.1.0, 7.0.0
Target: Any supported target

________________________________________________________________________

The PCI device names are listed in the /etc/system/config/pci/pcidatabase.com-tab_delimited.txt file. If the string is missing, then pci-tool -v will just print "<device id - unknown>".

For example. On the Intel NUC board there is no device string for Intel device 1570.

By adding "1570 Ethernet I219-V" below the "8086" vendor group the PCI device will show up with name.

Please also review the PCI Server User's Guide for more details.

________________________________________________________________________

NOTE: This entry has been validated against the SDP version listed above. Use caution when considering this advice for any other SDP version. For supported releases, please reach out to QNX Technical Support if you have any questions/concerns.

________________________________________________________________________

Related Attachments

None Found

Please contact us with your questions or concerns.