Knowledge Base

BSPs and drivers

Community resources

Product documentation

Questions?

Loading lsm-autoip.so fails on QNX 6.4.1

________________________________________________________________________

Applicable Environment

________________________________________________________________________

Topic: Loading lsm-autoip.so fails on QNX 6.4.1
SDP: 6.4.1
Target: Any supported target

________________________________________________________________________

Solution

________________________________________________________________________

Mounting lsm-autoip.so fails with the error below:

# mount -Tio-pkt -o abandon,delay=200,if=vlan1 lsm-autoip.so
unknown symbol: report
mount: Can't mount / (type io-pkt)
mount: Possible reason: No such device or address

This problem is fixed in QNX 6.5.

________________________________________________________________________

NOTE: This entry has been validated against the SDP version listed above. Use caution when considering this advice for any other SDP version. For supported releases, please reach out to QNX Technical Support if you have any questions/concerns.

________________________________________________________________________

Related Attachments

None Found

Please contact us with your questions or concerns.