Jump to main content
QNX Everywhere
QNX Everywhere
Advanced search
  1. Home
  2. The Linux Porting Guide

    This guide provides comprehensive information on porting software from Linux to QNX.

  3. Key differences between Linux and QNX 
  4. Conclusion
  • Introduction

    This introduction describes the basic requirements for using QNX SDP on the Raspberry Pi.

  • Quick start target image (QSTI)

    This guide provides instructions on how to set up the quick start target image (QSTI) on a Raspberry Pi.

  • Custom target image (CTI)

    This guide provides instructions on how to set up the custom target image (CTI) on a Raspberry Pi.

  • Interfacing with your hardware

    This chapter describes how to communicate with your given hardware.

  • The Linux Porting Guide

    This guide provides comprehensive information on porting software from Linux to QNX.

    • Porting to QNX
    • System architecture considerations
    • Embedded HW and BSPs for QNX
    • Key differences between Linux and QNX 
      • Kernel architecture
      • Resource management
      • Real-time capabilities
      • Fault tolerance and reliability
      • Security model
      • Use cases
      • Development and ecosystem
      • Summary of key differences
      • Where QNX excels
      • Conclusion
    • Porting a Linux open source component to QNX
    • Developing Drivers for QNX

Conclusion

While Linux offers greater flexibility and a larger ecosystem, QNX excels in reliability, real-time capabilities, and suitability for mission-critical applications.

 References:

  • Linux Kernel Documentation
  • Real-Time Linux (PREEMPT_RT)

  • QNX-Developer Documentation 

  • QNX-Neutrino-Product-Brief-v7

  • QNX-Momentics-Product-Brief

Page updated: September 05, 2025