QNX Momentics 6.3.2

New entries

devb-umass
  • There's a new iface= option for specifying the interface number of the device.
  • There's a new ignore_csw option that makes the driver ignore the Command Status Wrapper.
devc-con-hid
This console and keyboard I/O manager is similar to devc-con, but works in conjunction with io-hid and supports PS2, USB, and all other human-interface devices.
devc-serpsc
PSC UART serial communications manager for MPC5200
devn-rtl8150.so
Driver for SMC2208 USB/Ethernet adapters
packagebsp
Package a board support package (QNX Neutrino)
setupbsp
Set up a Board Support Package (QNX Neutrino)
startup-bios
The -I option is now documented. You can use this option to specify the highest-priority hardware interrupt.
use
There's a new -s option that you can use to display the version numbers of the source used in the executable.

Changed content

devc-sersci
Added the default values for the -r option for SH7770 and SH7780.
devu-prn
Added the -m option.
flashctl
This utility rounds the values of the -o and -l ("el") options down to the nearest block bound. If the range specified exceeds the partition size, it's rounded down to fit. If you use the -v option, flashctl displays what the values have been rounded to.
io-blk.so
  • Added the before and after options.
  • If you specify the verbose option, the extra information is sent to the system logger. The optional level argument indicates which categories of events to log.
mkifs
This entry now describes the main bootfiles, including raw.boot, elf.boot, binary.boot, and srec.boot; see the "Bootfile" section.

You might need to use the perms attribute to specify execute, setuid, and setgid permissions if you're running mkifs on a Windows host.

mount
Added the before and after options, and added io-usb to the table of mount types.
qconfig
Added the -c option.
pidin
The CPU usage that pidin times reports are approximate, and can be inaccurate.
rpcbind
This utility needs /etc/netconfig, the librpc shared library, as well as some specific entries in /etc/services.
setuid utilities
The following utilities need to have the setuid bit set in their permissions: crontab; dhcp.client; fontsleuth; ; ; login; lpr; lprq; lprrm; netstat; newgrp; passwd; ; ; ; ; ; ; ping; ping6; pppd; ; qnxinstall; rcp; rlogin; rsh; su; traceroute; traceroute6.

Errata

devf-*
We've corrected the description of the -r option for the devf-* drivers. You should always specify this option, unless you're debugging a problem concerning filesystem corruption.
grep
Only grep supports the -h option (which is a Neutrino extension); egrep and fgrep don't.
mkefs, mketfs, mkifs
The description of the perms is now correct; for an inline file, the default permissions are 0666.
show_vesa
You must log in as root and be in text mode to run this utility. This utility doesn't have any options.
stty
The stty under Neutrino doesn't support the lkhflow or lksflow option.