pci

Display PCI devices

Note: You need to log in as root to use this utility.

Syntax:

pci [-n] [-v]

Runs on:

QNX Neutrino

Options:

-n: The maximum number of PCI buses to scan.
-v: Be verbose; display all PCI devices.

Description:

The pci utility displays Peripheral Component Interconnect devices. By default, it displays only disk, network, and graphics devices. Use the -v (verbose) option to display all PCI devices.

CAUTION:

This utility is intended for debugging purposes; running it on an active system may cause some devices to hang.

Examples:

Here's some sample output from pci:

Class          = Mass Storage (IDE)
Vendor ID      = 8086, Intel Corporation
Device ID      = 7010h, 82371SB PIIX3 IDE Interface (Triton II)
PCI index      = 0
IO Address     = ffa0h enabled
PCI Int Pin    = NC
Interrupt line = 0