pci_irq_routing_options()

Arguments:

buf

A pointer to a IRQRoutingOptionsBuffer structure where the function can store the IRQ routing information. For information about the layout of this buffer, see PCI BIOS SPECIFICATION Revision 2.1. You can get it from the PCI Special Interest Group at http://pcisig.com/.

irq

A pointer to a location where the function can store the current state of interrupts.

Library:

libc

Use the -l c option to qcc to link against this library. This library is usually included automatically.

Description:

The pci_irq_routing_options() function returns the following:

• PCI interrupt routing options available on the system motherboard
• the current state of interrupts that are currently exclusively assigned to PCI

Routing information is returned in a data buffer that contains an IRQ routing for each PCI device or slot.

Returns:

PCI_SUCCESS

Success.

-1

You haven't called pci_attach(), or the call to it failed.

Examples:

#include <stdio.h>
#include <stdlib.h>
#include <errno.h>
#include <inttypes.h>
#include <hw/pci.h>
#include <sys/neutrino.h>

struct {
    IRQRoutingOptionsBuffer buf;
    uint8_t databuf [2048];
} route_buf;

int main (void)
{
    int phdl;
    uint32_t irq;


    if ((phdl = pci_attach (0)) == -1) {
        printf ("Unable to attach - errno %s\n", strerror (errno));
        exit (1);
        }

    memset (route_buf.databuf, 0, sizeof (route_buf.databuf));
    route_buf.buf.BufferSize = sizeof (route_buf.databuf);
    if (pci_irq_routing_options (&route_buf.buf, &irq) !=
      PCI_SUCCESS) {
        printf ("Routing option failed - errno %s\n",
                strerror (errno));
        exit (1);
        }

    printf ("PCI Irq Map = %x\n", irq);
    pci_detach (phdl);
    return (0);
}

Classification:

QNX Neutrino