Home
The Linux Porting Guide
This guide provides comprehensive information on porting software from Linux to QNX.
Porting to QNX
Build systems and cross compilation

Introduction
This introduction describes the basic requirements for using QNX SDP on the Raspberry Pi.
Quick start target image (QSTI)
This guide provides instructions on how to set up the quick start target image (QSTI) on a Raspberry Pi.
Custom target image (CTI)
This guide provides instructions on how to set up the custom target image (CTI) on a Raspberry Pi.
Interfacing with your hardware
This chapter describes how to communicate with your given hardware.
The Linux Porting Guide
This guide provides comprehensive information on porting software from Linux to QNX.

Build systems and cross compilation

This chapter describes build system tools and cross compilation techniques for QNX projects.

Page updated: September 05, 2025