![]() |
![]() |
![]() |
![]() |
![]() |
This version of this document is no longer maintained. For the latest documentation, see http://www.qnx.com/developers/docs. |
The Building Embedded Systems guide is intended for developers who are building embedded systems that will run under the QNX Neutrino RTOS.
![]() |
QNX Neutrino runs on several processor families (e.g. PowerPC, MIPS, ARM, SH-4, x86). For information on getting started with Neutrino on a particular board, refer to the appropriate BSP (Board Support Package) documentation for your board. |
This guide is organized around these main topics:
Topic | Chapter(s) |
---|---|
Getting the big picture | Overview of Building Embedded Systems |
Getting started with your board support package | Working with a BSP |
Making an image | Making an OS Image |
Preparing your target | Writing an IPL Program; Customizing Image Startup Programs; Customizing the Flash Filesystem; Sample Buildfiles |
Dealing with hardware issues | System Design Considerations |
Terms used in QNX docs | Glossary |
![]() |
We assume that you've already installed QNX Neutrino and that you're familiar with its architecture. For a detailed overview, see the System Architecture manual. |
If you plan to use the Photon microGUI in your embedded system, refer to the "Photon in Embedded Systems" appendix in the Photon Programmer's Guide.
Copyright © 1996-2006, QNX Software Systems GmbH & Co. KG. All rights reserved.
![]() |
![]() |
![]() |
![]() |