There are a number of sensors and cameras that you can connect to your
board.
Supported hardware boards
The reference image runs on the following Intel NUC platform: the
Intel
® Core
™ i5-6200U (formerly known as
SkyLake). The following list describes the boards we've tested:
- The ASRock Beebox with an Intel®; Core™
i5-6200U (formerly known as SkyLake). In this document, the
ASRock Beebox is often referred to as simply Beebox.
Supported cameras and sensors
The Beebox can be connected to multiple cameras and sensors. The board has only three
USB slots and one microUSB connector, and one USB port is used to boot your image.
You can use a USB 3.0 Hub to add ports.
For a list of supported cameras and sensors, see
Reference image sensor support in the
Understanding Reference Images chapter of the
Getting Started Overview
Guide.
Note: You should also look at the Release Notes to see
if there are any limitations for specific configurations.