IP communications

Through an IP connection, the IDE can debug, monitor, and profile programs as they run on the target.

To set up an IP connection, you must first connect the target and host machines to the same network, and ensure that TCP/IP networking is functional on both machines. Then, you must configure your target as follows:
Launch the qconn agent on the target, from a command-line shell or the boot script.
By default, qconn runs on port 8000 (as indicated in its usage message). You can use another port by explicitly stating it in the command, as in: qconn port=9000
For details on the arguments and semantics for this agent, see the qconn entry in the QNX Neutrino Utilities Reference.
To support application debugging, monitoring, and profiling, you must verify on the target that: At this point, you can create a target connection in the IDE and specify the target's IP address and the port where qconn runs. Then, you can select that new target connection in the launch bar to tell the IDE that you want to run a program on that target machine. When you then launch a project, the IDE uses the configured IP link to upload the project's executable binary to the target and to talk to qconn and gather information about the program after it starts running.
CAUTION:
Don't run qconn in a production setting as part of the normal system setup. The qconn utility is highly insecure because it doesn't do user validation and always runs as root, which allows users to download and execute arbitrary code on the target. You can use the utility temporarily (e.g., if you're running an analysis tool that needs to send data to the host) by accessing the target machine through Telnet or SSH and starting qconn manually. Or, you can secure qconn traffic using SSH, as explained below.